PO.DE.BOP.Precharge


Description

The nitrogen precharge of an accumulator bank that gives up a stated volume of fluid as its pressure falls from one value to another, by Boyle's law. One formula answers two questions. Measured: draw V_drawn gal from the bank with the charge pumps off, read the pressure before and after, and it returns the bank's average precharge. Design: put the fluid a stack needs as V_drawn, the fully charged pressure as P_start and the minimum operating pressure as P_final, and it returns the lowest precharge that still delivers that fluid above the minimum.

Formula

=LAMBDA(V_drawn_gal, V_total_gal, P_start_psi, P_final_psi, V_drawn_gal / V_total_gal * P_final_psi * P_start_psi / (P_start_psi - P_final_psi))

Parameters

Parameter Unit Description
V_drawn_gal gal Fluid drawn from the bank
V_total_gal gal Total nitrogen volume of the bank (bottles × volume per bottle)
P_start_psi psi Accumulator pressure before the draw
P_final_psi psi Accumulator pressure after the draw, below P_start_psi

Examples

Invocation Expected
=PO.DE.BOP.Precharge(20, 180, 3000, 2200) 917
=PO.DE.BOP.Precharge(5, 10, 3000, 1200) 1000
=PO.DE.BOP.Precharge(62.22, 160, 3000, 1200) 777.75

Need a custom LAMBDA? Suggest a New Lambda