Rate-Transient Variables LAMBDAs
Pressure-normalized rate and the flowing material balance's contacted oil in place, from rate and flowing pressure without a shut-in.
2 lambdas
PO.RTA.NormalizedRate(q, p_i, p_wf)
Returns the pressure-normalized oil rate of rate-transient analysis, q/(pi − pwf): the oil rate over the drawdown from the initial reservoir pressure to the flowing bottomhole pressure. It is the y axis of the Blasingame and Agarwal-Gardner plots, and it puts a well whose flowing pressure changes (a choke change, a pump speed-up) back on one decline, which a rate alone can't. Its reciprocal, (pi − pwf)/q, is the inverse normalized pressure a flowing material balance fits against material-balance time (`PO.RTA.FlowingMB`). It works on one value or on whole columns of rates and flowing pressures.
PO.RTA.FlowingMB(n_p, q, p_i, p_wf, ct)
Returns the oil in place a producing well has contacted, in STB, by the flowing material balance of Agarwal-Gardner and Mattar-Anderson. From each point's cumulative oil Np and rate q it forms the material-balance time tc = Np/q, fits the inverse normalized pressure (pi − pwf)/q against it with a straight line, and returns 1/(slope·ct). It needs no shut-in: the flowing pressures the well already records stand in for the average reservoir pressures a tank material balance asks for. Pass only the points in boundary-dominated flow; transient points sit off the line.