Proppant Conductivity and Crushing LAMBDAs
kept at the effective closure stress, and the fines the pack crushes to.
2 lambdas
PO.FRAC.Proppant.Conductivity(kfw_lo, sigma_lo, kfw_hi, sigma_hi, sigma_eff, retained)
The conductivity a proppant pack keeps at the effective closure stress it carries in the well, and after the losses a laboratory cell doesn't see. A vendor's conductivity table (API RP 19D / ISO 13503-5) gives kf·w at a few closure stresses; between two of them conductivity falls close to exponentially with stress, so the function interpolates log-linearly, and extrapolates the same way past them. The result is multiplied by the share retained, a factor for gel residue, embedment, fines migration and cyclic loading, which typically leaves 20 to 60 % of the laboratory value. The conductivity lost is one minus the result over the laboratory value.
PO.FRAC.Proppant.Crushing(sigma_c, pwf, sigma_lo, fines_lo, sigma_hi, fines_hi)
The fraction of a proppant that crushes to fines at the stress it carries in the well. The crush test (ISO 13503-2, formerly API RP 56 and 60) loads a pack in a cell and weighs the fines made at each stress, and the proppant's K-value is the highest stress, in thousands of psi, at which no more than 10 % crushes. The function takes two points of that test and the well's closure stress and flowing bottomhole pressure, and returns the fines fraction at the effective stress between them, interpolated log-linearly, since crushing grows close to exponentially with stress. Compare it with the 10 % the K-value is defined at.