Torque and Drag LAMBDAs
The buoyed weight, stretch and buckling loads of a string in the hole, the inputs of a torque-and-drag march and its lock-up check.
4 lambdas
PO.DE.TD.Buoyancy(PipeW_lbft, PipeOD_in, PipeID_in, MWi_ppg, MWo_ppg, RhoSteel_ppg)
Buoyancy factor of a pipe string with one fluid inside and another outside, and its buoyed weight per foot, for hookload, torque-and-drag and buckling work. Returns two cells: BF = 1 − (ρo D² − ρi d²) / (ρs (D² − d²)), then the buoyed weight W × BF in lb/ft.
PO.DE.TD.Stretch(F_lbf, W_lbft, L_ft, OD_in, ID_in, E_psi)
Elastic stretch of a pipe string hanging free, from a load at its lower end plus its own buoyed weight (Hooke's law). Use it for hookload stretch, free-point estimates from an overpull, and space-out. ΔL = 12 L (F + W L / 2) / (E As) in., with As = π/4 (D² − d²).
PO.DE.TD.Buckling.Sinusoidal(OD_in, ID_in, Dh_in, Wb_lbft, Inc_deg, E_psi, Mode)
The axial compression at which a pipe lying in a hole starts to buckle sinusoidally: Dawson and Paslay in an inclined hole, Lubinski in a vertical one. Mode 0 returns Fcr = 2 √(E I w sin θ / r) lbf; Mode 1 returns Fcr = 1.94 (E I w²)^(1/3) lbf.
PO.DE.TD.Buckling.Helical(OD_in, ID_in, Dh_in, Wb_lbft, Inc_deg, E_psi, Mode)
The axial compression above which a pipe in a hole buckles into a helix, the load that drives lock-up in torque and drag and the critical load `PO.CO.Tubing.Buckling` takes. Mode 0 returns Fhel = √2 × 2 √(E I w sin θ / r) lbf, √2 times the Dawson-Paslay load; Mode 1 returns Fhel = 5.55 (E I w²)^(1/3) lbf for a vertical hole.