PO.RP.Rod.Wair.SI(Ar, L)

Calculates rod string weight in air (SI units), [N].

PO.RP.Rod.Wbuoy.SI(Wair, SG)

Calculates buoyant rod string weight (weight in fluid) (SI units), [N].

PO.RP.Rod.Area.SI(d)

Calculates rod cross-sectional area from diameter (SI units), [cm2].

PO.RP.Rod.Wft.SI(d)

Calculates rod weight per foot for a given diameter (SI units), [kg/m].

PO.RP.Rod.Stretch.FluidLoad.SI(Fo, L, Ar)

Calculates rod stretch due to fluid load (SI units), [cm].

PO.RP.Rod.Stretch.RodWeight.SI(Wair, L, Ar)

Calculates rod stretch due to rod weight (self-weight stretch) (SI units), [cm].

PO.RP.Rod.Stretch.Total.SI(Fo, Wair, L, Ar)

Calculates total static rod stretch (fluid load + self-weight) (SI units), [cm].

PO.RP.Rod.MaxStress.SI(PPRL, Ar)

Calculates maximum rod stress from peak load (SI units), [kPa].

PO.RP.Rod.MinStress.SI(MPRL, Ar)

Calculates minimum rod stress from minimum load (SI units), [kPa].

PO.RP.Rod.StressRange.SI(smax, smin)

Calculates rod stress range (fatigue indicator) (SI units), [kPa].

PO.RP.Rod.TaperStress(t_min, s_max, s_min, sf, output)

The fatigue check of one section (taper) of a steel sucker-rod string by the API RP 11BR modified Goodman diagram. The allowable peak stress at the top of the taper rises with the minimum stress the rod sees on the downstroke: Sa = (T/4 + 0.5625·Smin)·SF, where T is the grade's minimum tensile strength and SF the service factor for the produced fluid. The function returns that allowable stress, the taper's loading, which is the stress range it carries over the range it may carry, (Smax − Smin)/(Sa − Smin), or the margin Sa − Smax. A loading above 1 (100 %) is outside the diagram: the rods are expected to fail in fatigue.

Need a custom LAMBDA? Request a Lambda