PO.RTA.NormalizedRate
Description
Returns the pressure-normalized oil rate of rate-transient analysis, q/(pi − pwf): the oil rate over the drawdown from the initial reservoir pressure to the flowing bottomhole pressure. It is the y axis of the Blasingame and Agarwal-Gardner plots, and it puts a well whose flowing pressure changes (a choke change, a pump speed-up) back on one decline, which a rate alone can't. Its reciprocal, (pi − pwf)/q, is the inverse normalized pressure a flowing material balance fits against material-balance time (`PO.RTA.FlowingMB`). It works on one value or on whole columns of rates and flowing pressures.
Formula
=LAMBDA(q, p_i, p_wf, IF((q<=0)+(p_i<=p_wf), NA(), q/(p_i-p_wf)))Parameters
| Parameter | Unit | Description |
|---|---|---|
q |
STB/d | Oil rate; above 0 |
p_i |
psi | Initial reservoir pressure |
p_wf |
psi | Flowing bottomhole pressure, below p_i |
Examples
| Invocation | Expected |
|---|---|
=PO.RTA.NormalizedRate(577.4, 5000, 1000) |
0.14435 |
=PO.RTA.NormalizedRate(114.8, 5000, 1000) |
0.0287 |
=PO.RTA.NormalizedRate(500, 5000, 3700) |
0.384615 |
=PO.RTA.NormalizedRate(1200, 3500, 2900) |
2 |