PO.DE.Hyd.AnnulusLoss


Description

Frictional pressure loss in an annulus for a power-law mud, with the annulus treated as a slot. The Reynolds number is the one PO.DE.Hyd.AnnulusReynolds returns, computed in place so the LAMBDA stands alone. Below 3470 − 1370n the laminar slot equation applies; above it the Blasius friction factor does. Feed the result to PO.DE.ECD.

Formula

=LAMBDA(Q_gpm, Dh_in, Dp_in, L_ft, MW_ppg, n, K_cp, LET( v, Q_gpm / (2.448 * (Dh_in^2 - Dp_in^2)), gap, Dh_in - Dp_in, re, 109000 * MW_ppg * v^(2 - n) / K_cp * (0.0208 * (Dh_in - Dp_in) / (2 + 1 / n))^n, L_ft * IF(re < 3470 - 1370 * n, K_cp * v^n * ((2 + 1 / n) / 0.0208)^n / (144000 * gap^(1 + n)), 0.0791 / re^0.25 * MW_ppg * v^2 / (21.1 * gap))))

Parameters

Parameter Unit Description
Q_gpm gpm Flow rate
Dh_in in Hole diameter, or casing inside diameter
Dp_in in Pipe outside diameter
L_ft ft Section length
MW_ppg ppg Mud weight
n dimensionless Flow behavior index
K_cp eq cp Consistency index

Examples

Invocation Expected
=PO.DE.Hyd.AnnulusLoss(500, 8.5, 5, 10000, 10, 0.6, 400) 200.61692
=PO.DE.Hyd.AnnulusLoss(500, 8.5, 6.5, 600, 10, 0.6, 200) 60.702206

Need a custom LAMBDA? Suggest a New Lambda