PO.PP.Porosity.FromNeutronDensity
Description
Porosity from a neutron and a density porosity read on the same lithology scale, the quick-look stand-in for a crossplot. In a liquid-filled zone the two curves bracket the true porosity and their mean is close to it. In a gas zone the density porosity reads high and the neutron low (the crossover), and the root-mean-square form weights the higher density reading. Returns the porosity as a fraction. Pass columns to get a column.
Formula
=LAMBDA(Phi_N, Phi_D, Mode, IF(Mode=1, (Phi_N+Phi_D)/2, IF(Mode=2, SQRT((Phi_N^2+Phi_D^2)/2), NA())))Parameters
| Parameter | Unit | Description |
|---|---|---|
Phi_N |
fraction | Neutron porosity, on the matrix the density porosity uses, shale-corrected if needed |
Phi_D |
fraction | Density porosity |
Mode |
— | 1 for the arithmetic mean (oil or water), 2 for the root-mean-square gas form |
Examples
| Invocation | Expected |
|---|---|
=PO.PP.Porosity.FromNeutronDensity(0.25, 0.15, 1) |
0.2 |
=PO.PP.Porosity.FromNeutronDensity(0.1, 0.2, 2) |
0.158113883 |
=PO.PP.Porosity.FromNeutronDensity(0.12, 0.24, 2) |
0.18973666 |
=PO.PP.Porosity.FromNeutronDensity(0.3, 0.3, 2) |
0.3 |