PO.ESP.Curve.PowerAtSpeed
Description
Brake power per stage on water at a rate and a frequency, from a pump curve published at the base frequency. The rate is moved back to the base frequency, the curve is read with PO.ESP.Curve.Power, and the power is moved forward with (f / f_base)³. Multiply by the fluid specific gravity for another fluid. Past run-out the result is #N/A.
Formula
=LAMBDA(q, f, f_base, curve_q, curve_hp, IF(q*f_base/f>MAX(curve_q), NA(), PO.ESP.Curve.Power(q*f_base/f, curve_q, curve_hp)*(f/f_base)^3))Parameters
| Parameter | Unit | Description |
|---|---|---|
q |
bbl/d | Rate at the operating frequency |
f |
Hz | Operating frequency |
f_base |
Hz | Base frequency of the curve |
curve_q |
bbl/d | Curve rates at the base frequency |
curve_hp |
HP/stage | Curve brake power per stage at the base frequency |
Examples
| Invocation | Expected |
|---|---|
=PO.ESP.Curve.PowerAtSpeed(500, 30, 60, {0, 500, 1000, 1500, 2000}, {0.5, 0.7, 0.9, 1, 1.05}) |
0.1125 |
=PO.ESP.Curve.PowerAtSpeed(1000, 60, 60, {0, 500, 1000, 1500, 2000}, {0.5, 0.7, 0.9, 1, 1.05}) |
0.9 |