PO.CO.Tubing.Ballooning
Description
Lubinski's ballooning effect: pressure inside the tubing swells it and shortens it (ballooning), pressure outside squeezes it and lengthens it (reverse ballooning). Returns the equivalent force and the free-tubing length change, from the changes of the average pressures. Returns two cells: F2 = 2ν (ΔPia Ai − ΔPoa Ao) lbf, then ΔL2 = −12 L F2 / (E As) in.
Formula
=LAMBDA(L_ft, OD_in, ID_in, dPia_psi, dPoa_psi, E_psi, Nu, LET(
areaI, PI()/4*ID_in^2,
areaO, PI()/4*OD_in^2,
frc, 2*Nu*(dPia_psi*areaI - dPoa_psi*areaO),
HSTACK(frc, -12*L_ft*frc/(E_psi*(areaO - areaI)))))Parameters
| Parameter | Unit | Description |
|---|---|---|
L_ft |
ft | Tubing length to the packer |
OD_in |
in | Tubing outside diameter |
ID_in |
in | Tubing inside diameter |
dPia_psi |
psi | Change of the average tubing pressure (mean of the surface and packer changes) |
dPoa_psi |
psi | Change of the average annulus pressure |
E_psi |
psi | Young's modulus, 30,000,000 for steel |
Nu |
dimensionless | Poisson's ratio, 0.3 for steel |
Examples
| Invocation | Expected |
|---|---|
=PO.CO.Tubing.Ballooning(10000, 2.875, 2.441, 1500, 0, 30000000, 0.3) |
[4211.802031, -9.297439] |
=PO.CO.Tubing.Ballooning(10000, 2.875, 2.441, 0, 1000, 30000000, 0.3) |
[-3895.084017, 8.598293] |