PO.SF.Comp.Tdisch
Description
Returns the discharge temperature of one compression stage from its suction temperature, its pressure ratio, the gas's ratio of specific heats and the isentropic efficiency. With an efficiency of 1 it is the ideal isentropic temperature T1·r^((k−1)/k); below 1 the extra work also goes into the gas, so the rise is the isentropic rise over the efficiency. The discharge temperature is what limits a stage's ratio, so a staging sheet checks it per stage.
Formula
=LAMBDA(t, ratio, k, eff, IF(OR(t<=-459.67, ratio<1, k<=1, eff<=0, eff>1), NA(), (t+459.67)*(1+(ratio^((k-1)/k)-1)/eff)-459.67))Parameters
| Parameter | Unit | Description |
|---|---|---|
t |
°F | Suction temperature of the stage |
ratio |
— | Stage pressure ratio, discharge over suction (absolute), 1 or more (`PO.SF.Comp.Stages`) |
k |
— | Ratio of specific heats Cp/Cv, above 1 (`PO.SF.Comp.k`) |
eff |
— | Isentropic (adiabatic) efficiency, above 0 and at most 1; 1 gives the ideal temperature |
Examples
| Invocation | Expected |
|---|---|
=PO.SF.Comp.Tdisch(80, 3, 1.296663, 1) |
234.216845 |
=PO.SF.Comp.Tdisch(80, 3, 1.296663, 0.8) |
272.771057 |
=PO.SF.Comp.Tdisch(100, 3.16227766, 1.26, 1) |
250.08201 |
=PO.SF.Comp.Tdisch(60, 4, 1.28, 0.85) |
276.583506 |
=PO.SF.Comp.Tdisch(80, 3, 1.296663, 1) |
232.148 |
=PO.SF.Comp.Tdisch(80, 3, 1.296663, 0.8) |
265.501 |
=IF(ISNA(PO.SF.Comp.Tdisch(60, 4, 1, 0.85)), 1, 0) |
1 |