PO.SF.Pump.NPSHa


Description

Returns the net positive suction head available at a pump's suction, in feet of the liquid pumped: how far the suction pressure stands above the liquid's vapour pressure. A pump needs at least the NPSH its curve requires at the duty, or the liquid flashes in the impeller eye and the pump cavitates. NPSHa = (ps − pv)·2.31/sg + hs − hf, where 2.31 ft of water is one psi.

Formula

=LAMBDA(ps, pv, sg, hs, hf, IF(OR(ps<=0, pv<0, sg<=0, hf<0), NA(), (ps-pv)*2.31/sg+hs-hf))

Parameters

Parameter Unit Description
ps psia Absolute pressure on the liquid's surface in the suction vessel (atmospheric for an open tank)
pv psia Liquid's true vapour pressure at the pumping temperature
sg water = 1 Liquid specific gravity at the pumping temperature
hs ft Liquid level above the pump centreline; negative for a suction lift
hf ft Friction head of the suction line, entrance, valves and strainer; 0 or more

Examples

Invocation Expected
=PO.SF.Pump.NPSHa(14.7, 10, 0.89, 8, 2) 18.198876
=PO.SF.Pump.NPSHa(14.696, 0.2563, 1, 10, 3) 40.355707
=PO.SF.Pump.NPSHa(100, 100, 0.85, 8, 2) 6
=PO.SF.Pump.NPSHa(14.7, 1, 0.85, -10, 1) 26.231765

Need a custom LAMBDA? Suggest a New Lambda