PO.RES.Waterflood.Hall


Description

The Hall plot of a water injector: the Hall integral Σ (pwf − pe) Δt against cumulative injection Σ q Δt, and the slope of the line through them. Under steady radial flow the slope is 141.2 μ (ln(re/rw) + s)/(k h), so a constant slope means constant injectivity, a slope that bends up means plugging or a growing skin, and one that bends down means a fracture opening or a negative skin. The data are per period, as a monthly injection report gives them: the days of injection in the period, the average bottomhole pressure and the average rate.

Formula

=LAMBDA(dt, Pwf, Pe, Q, Mode, LET( hall, SCAN(0, (Pwf-Pe)*dt, LAMBDA(acc, v, acc+v)), wi, SCAN(0, Q*dt, LAMBDA(acc, v, acc+v)), IF(Mode=1, hall, IF(Mode=2, wi, IF(Mode=3, SLOPE(hall, wi), NA())))))

Parameters

Parameter Unit Description
dt days Injection days in each period, one column
Pwf psi Average bottomhole injection pressure in each period, same rows
Pe psi Average reservoir pressure: one value, or one per period
Q bbl/d Average injection rate in each period, same rows
Mode — 1 Hall integral, psi·d; 2 cumulative injection, bbl; 3 slope of the Hall integral against cumulative injection, psi·d/bbl, by least squares over all rows

Examples

Invocation Expected
=PO.RES.Waterflood.Hall({30;31;30;31}, {2500;2600;2550;2700}, 1000, {1000;1200;1100;1300}, 1) [45000, 94600, 141100, 193800]
=PO.RES.Waterflood.Hall({30;31;30;31}, {2500;2600;2550;2700}, 1000, {1000;1200;1100;1300}, 2) [30000, 67200, 100200, 140500]
=PO.RES.Waterflood.Hall({30;31;30;31}, {2500;2600;2550;2700}, 1000, {1000;1200;1100;1300}, 3) 1.35159581
=PO.RES.Waterflood.Hall({30;31;30;31}, {2500;2500;2500;2500}, 1000, {1000;1000;1000;1000}, 3) 1.5
=PO.RES.Waterflood.Hall({30;31;30;31}, 1000+0.5433735874434231*{500;800;1000;1200}, 1000, {500;800;1000;1200}, 3) 0.5433735874

Need a custom LAMBDA? Suggest a New Lambda