PO.RES.RF.Analogue
Description
A first estimate of the primary oil recovery factor from the statistical correlations fitted to field histories: the API study of Arps and co-workers for solution-gas drive and for water drive, and Guthrie and Greenberger's water-drive regression. Use it where there is no production history to forecast from, and set it against the field analogues. Returns the recovery factor as a fraction of the oil initially in place.
Formula
=LAMBDA(Mode, Phi, Sw, Bo, k, Mu_o, Mu_w, P_ref, P_a, H, IF(Mode=1, 0.41815*(Phi*(1-Sw)/Bo)^0.1611*(k/1000/Mu_o)^0.0979*Sw^0.3722*(P_ref/P_a)^0.1741, IF(Mode=2, 0.54898*(Phi*(1-Sw)/Bo)^0.0422*(k/1000*Mu_w/Mu_o)^0.077*Sw^(-0.1903)*(P_ref/P_a)^(-0.2159), IF(Mode=3, 0.2719*LOG10(k)+0.25569*Sw-0.1355*LOG10(Mu_o)-1.538*Phi-0.00035*H+0.11403, NA()))))Parameters
| Parameter | Unit | Description |
|---|---|---|
Mode |
— | 1 Arps solution-gas drive, 2 Arps water drive, 3 Guthrie-Greenberger water drive |
Phi |
fraction | Porosity |
Sw |
fraction | Initial (connate) water saturation |
Bo |
rb/STB | Oil formation volume factor: at the bubble point for Mode 1, initial for Mode 2; not used by Mode 3 |
k |
mD | Permeability |
Mu_o |
cp | Oil viscosity: at the bubble point for Mode 1, initial for Modes 2 and 3 |
Mu_w |
cp | Initial water viscosity, Mode 2 only |
P_ref |
psia | Bubble-point pressure for Mode 1, initial pressure for Mode 2; not used by Mode 3 |
P_a |
psia | Abandonment pressure, Modes 1 and 2 |
H |
ft | Net pay thickness, Mode 3 only |
Examples
| Invocation | Expected |
|---|---|
=PO.RES.RF.Analogue(1, 0.2, 0.25, 1.3, 100, 1.5, 0, 2500, 500, 0) |
0.17894054 |
=PO.RES.RF.Analogue(1, 0.15, 0.3, 1.2, 10, 2, 0, 2000, 200, 0) |
0.160362675 |
=PO.RES.RF.Analogue(2, 0.2, 0.25, 1.3, 100, 1.5, 0.5, 3000, 1000, 0) |
0.396097741 |
=PO.RES.RF.Analogue(2, 0.25, 0.2, 1.15, 1000, 5, 0.6, 4000, 2000, 0) |
0.506543925 |
=PO.RES.RF.Analogue(3, 0.2, 0.25, 0, 100, 1.5, 0, 0, 0, 50) |
0.372792134 |
=PO.RES.RF.Analogue(3, 0.25, 0.3, 0, 500, 3, 0, 0, 0, 30) |
0.464937014 |
=IF(ISERROR(PO.RES.RF.Analogue(4, 0.2, 0.25, 1.3, 100, 1.5, 0.5, 3000, 1000, 50)), 1, 0) |
1 |