PO.DE.Surge.Burkhardt
Description
The effective annular mud velocity Burkhardt's steady-state surge and swab model assigns to a pipe moving at a given speed: the mud the pipe displaces, plus the mud that clings to it. The surge (running in) or swab (pulling out) pressure is the annular friction loss at this velocity. v = vp (A / (Dh² − Dp²) + Kc) ft/min, where A is Dp² for closed-end pipe (Mode 0) and Dp² − Di² for open-end pipe (Mode 1).
Formula
=LAMBDA(Vp_ftmin, Dh_in, Dp_in, Di_in, Kc, Mode, Vp_ftmin*(IF(Mode=1, Dp_in^2 - Di_in^2, Dp_in^2)/(Dh_in^2 - Dp_in^2) + Kc))Parameters
| Parameter | Unit | Description |
|---|---|---|
Vp_ftmin |
ft/min | Pipe speed (a 93 ft stand in 20 s is 279 ft/min); use the peak, about 1.5 times the average |
Dh_in |
in | Hole or casing inside diameter |
Dp_in |
in | Pipe outside diameter |
Di_in |
in | Pipe inside diameter; not used in Mode 0 |
Kc |
dimensionless | Clinging constant, about 0.45 for usual pipe-to-hole ratios (Burkhardt's chart) |
Mode |
dimensionless | 0 closed-end pipe (float, or plugged bit); 1 open-end pipe, all steel displacement up the annulus |
Examples
| Invocation | Expected |
|---|---|
=PO.DE.Surge.Burkhardt(270, 8.5, 4.5, 3.826, 0.45, 0) |
226.644231 |
=PO.DE.Surge.Burkhardt(270, 8.5, 4.5, 3.826, 0.45, 1) |
150.637798 |
=PO.DE.Surge.Burkhardt(90, 8.5, 4.5, 3.826, 0.45, 0) |
75.548077 |