PO.DE.HC.SlipVelocity
Description
How fast a drilled cutting falls back through a power-law mud rising in the annulus, by Moore's correlation. The mud's apparent viscosity is taken at the shear rate of the annular flow, and the drag regime (laminar, intermediate or turbulent) is chosen from the particle Reynolds number. The result is in ft/min, the unit of `PO.DE.AnnularVelocity`, so the two subtract to the cuttings' net rise velocity and give the transport ratio (`PO.DE.HC.TransportRatio`).
Formula
=LAMBDA(Dc_in, RhoC_ppg, MW_ppg, n, K_eqcp, Dh_in, Dp_in, Va_ftmin, LET(
vMud, Va_ftmin / 60,
muApp, K_eqcp / 144 * ((Dh_in - Dp_in) / vMud) ^ (1 - n) * ((2 + 1 / n) / 0.0208) ^ n,
dRho, RhoC_ppg - MW_ppg,
vsMid, 2.9 * Dc_in * dRho ^ 0.667 / (MW_ppg ^ 0.333 * muApp ^ 0.333),
reMid, 928 * MW_ppg * vsMid * Dc_in / muApp,
vsTurb, 1.54 * SQRT(Dc_in * dRho / MW_ppg),
vsLam, 82.87 * Dc_in ^ 2 * dRho / muApp,
60 * IF(reMid > 300, vsTurb, IF(reMid < 3, vsLam, vsMid))))Parameters
| Parameter | Unit | Description |
|---|---|---|
Dc_in |
in | Cutting diameter |
RhoC_ppg |
ppg | Cutting density: 8.34 × specific gravity (21.7 ppg at 2.6 for shale and sandstone) |
MW_ppg |
ppg | Mud weight |
n |
dimensionless | Power-law flow behaviour index (`PO.DE.Rheo.PowerLawIndex`) |
K_eqcp |
eq cp | Power-law consistency index (`PO.DE.Rheo.PowerLawK`) |
Dh_in |
in | Hole diameter, or casing inside diameter |
Dp_in |
in | Pipe outside diameter |
Va_ftmin |
ft/min | Mean annular velocity of the mud (`PO.DE.AnnularVelocity`) |
Examples
| Invocation | Expected |
|---|---|
=PO.DE.HC.SlipVelocity(0.25, 22, 11, 0.64599, 196.02, 12.25, 5, 102) |
24.55 |
=PO.DE.HC.SlipVelocity(0.25, 21.684, 11.2, 0.68766, 252.005, 8.5, 5, 259.259) |
24.544274 |
=PO.DE.HC.SlipVelocity(0.5, 21.684, 9, 0.8, 30, 12.25, 5, 120) |
77.56465 |
=PO.DE.HC.SlipVelocity(0.02, 21.684, 11.2, 0.5, 1500, 8.5, 5, 100) |
0.0996091 |