PO.CO.Tubing.Piston


Description

Lubinski's piston effect: the force a pressure change at the packer puts on the end of a tubing string that seals in a packer bore, and the length change it causes if the tubing is free to move. Returns two cells: F1 = (Ap − Ai) ΔPi − (Ap − Ao) ΔPo lbf, then ΔL1 = −12 L F1 / (E As) in.

Formula

=LAMBDA(L_ft, OD_in, ID_in, Bore_in, dPi_psi, dPo_psi, E_psi, LET( areaI, PI()/4*ID_in^2, areaO, PI()/4*OD_in^2, areaP, PI()/4*Bore_in^2, frc, (areaP - areaI)*dPi_psi - (areaP - areaO)*dPo_psi, HSTACK(frc, -12*L_ft*frc/(E_psi*(areaO - areaI)))))

Parameters

Parameter Unit Description
L_ft ft Tubing length to the packer
OD_in in Tubing outside diameter
ID_in in Tubing inside diameter
Bore_in in Packer seal-bore diameter
dPi_psi psi Change of tubing pressure at the packer
dPo_psi psi Change of annulus pressure at the packer
E_psi psi Young's modulus, 30,000,000 for steel

Examples

Invocation Expected
=PO.CO.Tubing.Piston(10000, 2.875, 2.441, 3.25, 3000, 0, 30000000) [10847.9642, -23.946589]
=PO.CO.Tubing.Piston(10000, 2.875, 2.441, 3.25, 3000, 1000, 30000000) [9044.002794, -19.964392]
=PO.CO.Tubing.Piston(10000, 2.875, 2.441, 2.688, 3000, 1000, 30000000) [3802.010407, -8.392835]

Need a custom LAMBDA? Suggest a New Lambda