PO.CO.Mat.CO2Material
Description
A first-pass material for a line or tubing in CO2 service, chosen in the order NORSOK M-001 asks a designer to try them: carbon steel with a corrosion allowance if the bare rate over the design life fits the allowance; carbon steel with a corrosion inhibitor if the inhibited rate does; otherwise a corrosion-resistant alloy, the cheapest one that the temperature and the H2S allow. The function returns the material's name: "Carbon steel", "Carbon steel + inhibitor", "13Cr", "Duplex" or "Nickel alloy". It is the start of a materials selection, not its end: the selection report weighs cost, weldability, oxygen, chlorides and inspection too. For the CO2 corrosion blueprint's flowline, `=PO.CO.Mat.CO2Material(9.18, 1.38, 150, 1, 20, 3)` returns "13Cr".
Formula
=LAMBDA(cr, cr_inh, t, region, life, ca_max, IF(OR(cr<0, cr_inh<0, cr_inh>cr, life<=0, ca_max<0, region<0, region>3), NA(), IF(cr*life<=ca_max, "Carbon steel", IF(cr_inh*life<=ca_max, "Carbon steel + inhibitor", IF(AND(t<=302, region<=1), "13Cr", IF(AND(t<=450, region<=2), "Duplex", "Nickel alloy"))))))Parameters
| Parameter | Unit | Description |
|---|---|---|
cr |
mm/yr | CO2 corrosion rate of bare carbon steel, such as de Waard-Milliams (`PO.FA.Corrosion.CR.CO2`) |
cr_inh |
mm/yr | The rate with the corrosion inhibitor, no more than `cr` (`PO.FA.Corrosion.CR.Inh`) |
t |
°F | Highest operating temperature |
region |
— | Carbon-steel SSC region of NACE MR0175 / ISO 15156-2, 0 to 3 (`PO.FA.Corrosion.H2S.Region`) |
life |
years | Design life |
ca_max |
mm | Corrosion allowance the design accepts for carbon steel (NORSOK M-001 uses 3 mm as its normal allowance) |
Examples
| Invocation | Expected |
|---|---|
=IF(PO.CO.Mat.CO2Material(9.18, 1.38, 150, 1, 20, 3)="13Cr", 1, 0) |
1 |
=IF(PO.CO.Mat.CO2Material(0.1, 0.015, 150, 1, 20, 3)="Carbon steel", 1, 0) |
1 |
=IF(PO.CO.Mat.CO2Material(0.15, 0.0225, 150, 0, 20, 3)="Carbon steel", 1, 0) |
1 |
=IF(PO.CO.Mat.CO2Material(0.5, 0.075, 150, 3, 20, 3)="Carbon steel + inhibitor", 1, 0) |
1 |
=IF(PO.CO.Mat.CO2Material(9.18, 1.38, 302, 1, 20, 3)="13Cr", 1, 0) |
1 |
=IF(PO.CO.Mat.CO2Material(9.18, 1.38, 303, 1, 20, 3)="Duplex", 1, 0) |
1 |
=IF(PO.CO.Mat.CO2Material(9.18, 1.38, 150, 2, 20, 3)="Duplex", 1, 0) |
1 |
=IF(PO.CO.Mat.CO2Material(9.18, 1.38, 450, 2, 20, 3)="Duplex", 1, 0) |
1 |
=IF(PO.CO.Mat.CO2Material(9.18, 1.38, 150, 3, 20, 3)="Nickel alloy", 1, 0) |
1 |
=IF(PO.CO.Mat.CO2Material(9.18, 1.38, 451, 0, 20, 3)="Nickel alloy", 1, 0) |
1 |
=IF(PO.CO.Mat.CO2Material(9.18, 1.38, 150, 1, 20, 30)="Carbon steel + inhibitor", 1, 0) |
1 |
=IF(ISNA(PO.CO.Mat.CO2Material(1, 2, 150, 1, 20, 3)), 1, 0) |
1 |
=IF(ISNA(PO.CO.Mat.CO2Material(1, 0.1, 150, 4, 20, 3)), 1, 0) |
1 |