PO.WI.Kill.FluidLoss
Description
How fast a permeable zone takes kill fluid at an overbalance, by steady radial Darcy flow, and how much it takes over a period. The same formula gives the rate a zone accepts fluid when bullheading at a given pressure over the formation's. Output 0 returns the rate in bbl/hr and 1 the volume over Time_hr in bbl.
Formula
=LAMBDA(k_md, h_ft, dP_psi, mu_cp, re_ft, Dh_in, Time_hr, Output, LET(
rate, 0.00708 * k_md * h_ft * dP_psi / (mu_cp * LN(re_ft / (Dh_in / 24))) / 24,
IF(Output = 1, rate * Time_hr, rate)))Parameters
| Parameter | Unit | Description |
|---|---|---|
k_md |
md | Permeability of the zone |
h_ft |
ft | Height of the zone open to the well |
dP_psi |
psi | Overbalance: wellbore pressure less formation pressure at the zone |
mu_cp |
cp | Viscosity of the fluid entering the zone (filtrate, brine or whole mud) |
re_ft |
ft | Radius the fluid has invaded to, or the drainage radius |
Dh_in |
in | Hole diameter at the zone |
Time_hr |
hr | Time the zone is exposed (used by Output 1) |
Output |
dimensionless | 0 rate, bbl/hr; 1 volume over Time_hr, bbl |
Examples
| Invocation | Expected |
|---|---|
=PO.WI.Kill.FluidLoss(200, 20, 624, 0.3, 3.694528, 12, 1, 0) |
1200 |
=PO.WI.Kill.FluidLoss(200, 20, 624, 0.3, 3.694528, 12, 1, 1) |
1227.2 |
=PO.WI.Kill.FluidLoss(50, 20, 100, 1, 500, 8.5, 24, 1) |
97.6202 |