PO.WI.Kill.Bullhead


Description

The highest surface pressure allowed while bullheading, which pumps kill fluid down a string to push the well's fluids back into the formation. It must not fracture the formation: the limit is the fracture pressure at the weak point less the hydrostatic pressure of the column above it. As kill fluid replaces the initial column, the column gets heavier and the limit falls, in a straight line with the volume pumped for a string of one capacity. V_pumped of 0 returns the initial limit, and V_pumped of V_string or more returns the final one, with the string full of kill fluid.

Formula

=LAMBDA(FracGrad_psift, TVD_ft, P_hyd_initial_psi, KillFluid_ppg, V_string_bbl, V_pumped_bbl, FracGrad_psift * TVD_ft - ((1 - MAX(0, MIN(1, V_pumped_bbl / V_string_bbl))) * P_hyd_initial_psi + MAX(0, MIN(1, V_pumped_bbl / V_string_bbl)) * (0.052 * KillFluid_ppg * TVD_ft)))

Parameters

Parameter Unit Description
FracGrad_psift psi/ft Fracture gradient at the weak point (perforations, or the casing shoe)
TVD_ft ft True vertical depth of the weak point
P_hyd_initial_psi psi Hydrostatic pressure of the initial column above the weak point (influx, gas or mud)
KillFluid_ppg ppg Kill fluid density
V_string_bbl bbl Volume of the string from surface to the weak point
V_pumped_bbl bbl Kill fluid pumped so far

Examples

Invocation Expected
=PO.WI.Kill.Bullhead(0.862, 6480, 326, 8.4, 37.5, 0) 5260
=PO.WI.Kill.Bullhead(0.862, 6480, 326, 8.4, 37.5, 37.5) 2756
=PO.WI.Kill.Bullhead(0.862, 6480, 326, 8.4, 37.5, 18.75) 4007.53
=PO.WI.Kill.Bullhead(0.862, 6480, 326, 8.4, 37.5, 50) 2755.296

Need a custom LAMBDA? Suggest a New Lambda