PO.DE.PP.Eaton


Description

Pore pressure in shale by Eaton's method, from how far a sonic or resistivity log departs from its normal-compaction trend at the same depth. Undercompacted, overpressured shale is slower (higher transit time) and more conductive (lower resistivity) than the trend. Returns the pore pressure in the unit Sv and Pn are given in: psi, psi/ft or ppg.

Formula

=LAMBDA(Sv, Pn, Observed, Normal, Mode, LET( ratio, IF(Mode=1, Normal/Observed, Observed/Normal), expo, IF(Mode=1, 3, 1.2), IF(OR(Mode=1, Mode=2), Sv-(Sv-Pn)*ratio^expo, NA())))

Parameters

Parameter Unit Description
Sv psi, psi/ft or ppg Overburden stress or gradient at the depth (from `PO.GM.Stress.Overburden`)
Pn same as Sv Normal (hydrostatic) pore pressure or gradient at the depth, e.g. 0.465 psi/ft
Observed µs/ft or ohm·m Log reading in shale: the transit time (Mode 1) or the resistivity (Mode 2)
Normal µs/ft or ohm·m The normal-compaction trend value at the same depth, same unit as Observed
Mode — 1 sonic: ratio Normal/Observed, exponent 3. 2 resistivity: ratio Observed/Normal, exponent 1.2

Examples

Invocation Expected
=PO.DE.PP.Eaton(1, 0.465, 125, 100, 1) 0.72608
=PO.DE.PP.Eaton(1, 0.465, 0.5, 1, 2) 0.767127724
=PO.DE.PP.Eaton(19.2, 8.94, 100, 100, 1) 8.94
=PO.DE.PP.Eaton(10000, 4650, 150, 110, 1) 7890.118519

Need a custom LAMBDA? Suggest a New Lambda