PO.DE.KickTol.Volume
Description
The largest kick, in barrels at the bit, that a well can shut in and circulate out without breaking down the casing shoe. It uses the single-bubble method for a design kick intensity and influx gradient. The shoe allows an influx of height H = (MAASP − 0.052 × KI × TVD) / (0.052 × MW − G_influx). Two volumes follow from it: that height around the BHA at the bit, and that height around the drill pipe at the shoe, taken back to bottom-hole pressure by Boyle's law because the bubble expands on its way up. The kick tolerance is the smaller. Output 0 returns it, 1 the height H in ft, 2 the volume from the shoe case and 3 the volume at the bit.
Formula
=LAMBDA(MAASP_psi, MW_ppg, KI_ppg, G_influx_psift, TVD_ft, ShoeTVD_ft, C_bit_bblft, C_shoe_bblft, Output, LET(
gMud, 0.052 * MW_ppg,
hMax, MAX(0, (MAASP_psi - 0.052 * KI_ppg * TVD_ft) / (gMud - G_influx_psift)),
vBit, hMax * C_bit_bblft,
vShoe, hMax * C_shoe_bblft * (MAASP_psi + gMud * ShoeTVD_ft) / (0.052 * (MW_ppg + KI_ppg) * TVD_ft),
IF(Output = 1, hMax, IF(Output = 2, vShoe, IF(Output = 3, vBit, MIN(vBit, vShoe))))))Parameters
| Parameter | Unit | Description |
|---|---|---|
MAASP_psi |
psi | Maximum allowable annular surface pressure with the mud in the hole (`PO.DE.WellControl.MAASP`) |
MW_ppg |
ppg | Mud weight in the hole |
KI_ppg |
ppg | Design kick intensity: formation pressure over the mud weight, as an equivalent mud weight |
G_influx_psift |
psi/ft | Design influx gradient (about 0.1 for gas) |
TVD_ft |
ft | True vertical depth of the bit (the kick zone) |
ShoeTVD_ft |
ft | True vertical depth of the casing shoe |
C_bit_bblft |
bbl/ft | Annular capacity around the BHA at the bit |
C_shoe_bblft |
bbl/ft | Annular capacity around the drill pipe at the shoe |
Output |
dimensionless | 0 kick tolerance (the smaller); 1 largest influx height, ft; 2 volume from the shoe case; 3 volume at the bit |
Examples
| Invocation | Expected |
|---|---|
=PO.DE.KickTol.Volume(468, 14.5, 0.5, 0.1, 10000, 6000, 0.0226, 0.0459, 1) |
318 |
=PO.DE.KickTol.Volume(468, 14.5, 0.5, 0.1, 10000, 6000, 0.0226, 0.0459, 3) |
7.2 |
=PO.DE.KickTol.Volume(468, 14.5, 0.5, 0.1, 10000, 6000, 0.0226, 0.0459, 2) |
9.3 |
=PO.DE.KickTol.Volume(468, 14.5, 0.5, 0.1, 10000, 6000, 0.0226, 0.0459, 0) |
7.2 |
=PO.DE.KickTol.Volume(874, 10, 0, 0.12, 10000, 4000, 0.0826, 0.1215, 1) |
2185 |
=PO.DE.KickTol.Volume(100, 10, 1, 0.1, 10000, 4000, 0.03, 0.05, 0) |
0 |