PO.DE.KickTol.Intensity
Description
The largest kick intensity the casing shoe can take with a given influx at the bit. It is how far the formation pressure can be above the mud weight, as an equivalent mud weight in ppg, before the shut-in casing pressure reaches MAASP. With no influx it is the kick tolerance factor, (shoe TVD / TVD) × (leak-off EMW − MW). Each barrel of influx displaces mud, so the shoe takes less.
Formula
=LAMBDA(MAASP_psi, MW_ppg, G_influx_psift, TVD_ft, V_kick_bbl, C_ann_bblft, (MAASP_psi - V_kick_bbl / C_ann_bblft * (0.052 * MW_ppg - G_influx_psift)) / (0.052 * TVD_ft))Parameters
| Parameter | Unit | Description |
|---|---|---|
MAASP_psi |
psi | Maximum allowable annular surface pressure with the mud in the hole (`PO.DE.WellControl.MAASP`) |
MW_ppg |
ppg | Mud weight in the hole |
G_influx_psift |
psi/ft | Influx gradient (about 0.1 for gas) |
TVD_ft |
ft | True vertical depth of the bit (the kick zone) |
V_kick_bbl |
bbl | Influx volume at the bit (0 for the kick tolerance factor) |
C_ann_bblft |
bbl/ft | Annular capacity the influx fills at the bit |
Examples
| Invocation | Expected |
|---|---|
=PO.DE.KickTol.Intensity(468, 14.5, 0.1, 10000, 7.2, 0.0226) |
0.5 |
=PO.DE.KickTol.Intensity(873.6, 10, 0.12, 10000, 0, 0.0826) |
1.68 |
=PO.DE.KickTol.Intensity(468, 14.5, 0.1, 10000, 0, 0.0226) |
0.9 |