PO.FRAC.Eval.ISIP
Description
The instantaneous shut-in pressure (ISIP) at the fracture, and the net pressure and fracture gradient it gives, from the ISIP read at surface when the pumps stop. At shut-in the pipe friction and the perforation friction vanish, so the bottomhole ISIP is the surface ISIP plus the static column of the treating fluid. The net pressure is the bottomhole ISIP less the closure stress: the pressure that held the fracture open at the end of pumping, which the geometry models predict and which the net-pressure plot (Nolte-Smith) follows during the job.
Formula
=LAMBDA(isip_surf, rho_fluid, tvd, closure, output, IF(OR(rho_fluid<0, tvd<=0), NA(), LET(
isip_bh, isip_surf+0.052*rho_fluid*tvd, IF(output="ISIP", isip_bh, IF(output="Pnet", isip_bh-closure, IF(output="Gradient", isip_bh/tvd, NA()))))))Parameters
| Parameter | Unit | Description |
|---|---|---|
isip_surf |
psi | ISIP read at surface when the pumps stop |
rho_fluid |
ppg | Density of the fluid in the wellbore at shut-in |
tvd |
ft | True vertical depth of the perforations |
closure |
psi | Closure stress (fracture closure pressure), from a step-rate test or the falloff |
output |
text | "ISIP" (bottomhole ISIP, psi), "Pnet" (net pressure, psi) or "Gradient" (fracture gradient, ISIP/TVD, psi/ft) |
Examples
| Invocation | Expected |
|---|---|
=PO.FRAC.Eval.ISIP(3000, 8.4, 8000, 5800, "ISIP") |
6494.4 |
=PO.FRAC.Eval.ISIP(3000, 8.4, 8000, 5800, "Pnet") |
694.4 |
=PO.FRAC.Eval.ISIP(3000, 8.4, 8000, 5800, "Gradient") |
0.8118 |
=PO.FRAC.Eval.ISIP(2200, 10, 7000, 5000, "Pnet") |
840 |
=IF(ISNA(PO.FRAC.Eval.ISIP(3000, 8.4, 8000, 5800, "BHP")), 1, 0) |
1 |