PO.PP.Sw.WaxmanSmits
Description
Water saturation in a shaly sand from the Waxman-Smits equation, which puts the clay's conductivity in the exchange cations (Qv) rather than in a shale volume. The clay term grows as Sw falls, so the equation is solved for Sw: in closed form for n = 2, or by Newton's method for any n. Returns Sw as a fraction.
Formula
=LAMBDA(a, m, n, Phi, Rw, Rt, B, Qv, Mode, LET(
ct, 1/Rt,
cw, 1/Rw,
kf, Phi^m/a,
bq, B*Qv,
IF(Mode=1, IF(n=2, (-bq+SQRT(bq^2+4*cw*ct/kf))/(2*cw), NA()), IF(Mode=2, REDUCE(1, SEQUENCE(30), LAMBDA(s, j, s-(kf*(cw*s^n+bq*s^(n-1))-ct)/(kf*(n*cw*s^(n-1)+(n-1)*bq*s^(n-2))))), NA()))))Parameters
| Parameter | Unit | Description |
|---|---|---|
a |
dimensionless | Tortuosity factor |
m |
dimensionless | Shaly-sand cementation exponent m* |
n |
dimensionless | Shaly-sand saturation exponent n* |
Phi |
fraction | Total porosity |
Rw |
ohm·m | Formation-water resistivity at formation temperature |
Rt |
ohm·m | True formation resistivity |
B |
(S/m)/(meq/cm3) | Equivalent conductance of the clay exchange cations at formation temperature and Rw |
Qv |
meq/cm3 | Cation exchange capacity per unit pore volume (`PO.PP.Qv.FromCEC`) |
Mode |
— | 1 for the closed form (n must be 2), 2 for the Newton solve (any n) |
Examples
| Invocation | Expected |
|---|---|
=PO.PP.Sw.WaxmanSmits(1, 2, 2, 0.2, 0.05, 20, 4, 0, 1) |
0.25 |
=PO.PP.Sw.WaxmanSmits(1, 2, 2, 0.2, 0.05, 20, 4, 0, 2) |
0.25 |
=PO.PP.Sw.WaxmanSmits(1, 2, 2, 0.2, 0.05, 10, 4, 0.3, 1) |
0.3248239 |
=PO.PP.Sw.WaxmanSmits(1, 2, 2, 0.2, 0.05, 10, 4, 0.3, 2) |
0.3248239 |
=PO.PP.Sw.WaxmanSmits(1, 2, 2.2, 0.2, 0.05, 10, 4, 0.3, 2) |
0.362464994 |
=PO.PP.Sw.WaxmanSmits(1, 2, 1.8, 0.2, 0.05, 10, 4, 0.3, 2) |
0.283074891 |