PO.PP.Sw.DualWater


Description

Total and effective water saturation from the dual-water model, which treats a shaly sand as two waters in parallel: the clay-bound water, with its own resistivity, and the free formation water. The bound-water term changes the effective water conductivity as Sw changes, so the equation is solved for Swt: in closed form for n = 2, or by Newton's method for any n. Returns two cells in a row: {Swt, Swe}, where Swe = (Swt − Swb)/(1 − Swb).

Formula

=LAMBDA(a, m, n, Phi_t, Rw, Rwb, Swb, Rt, Mode, LET( ct, 1/Rt, cw, 1/Rw, kf, Phi_t^m/a, bq, (1/Rwb-1/Rw)*Swb, swt, IF(Mode=1, IF(n=2, (-bq+SQRT(bq^2+4*cw*ct/kf))/(2*cw), NA()), IF(Mode=2, REDUCE(1, SEQUENCE(30), LAMBDA(s, j, s-(kf*(cw*s^n+bq*s^(n-1))-ct)/(kf*(n*cw*s^(n-1)+(n-1)*bq*s^(n-2))))), NA())), HSTACK(swt, (swt-Swb)/(1-Swb))))

Parameters

Parameter Unit Description
a dimensionless Tortuosity factor
m dimensionless Cementation exponent
n dimensionless Saturation exponent
Phi_t fraction Total porosity
Rw ohm·m Free formation-water resistivity at formation temperature
Rwb ohm·m Bound-water resistivity, usually from a nearby shale
Swb fraction Bound-water saturation, a fraction of total porosity
Rt ohm·m True formation resistivity
Mode — 1 for the closed form (n must be 2), 2 for the Newton solve (any n)

Examples

Invocation Expected
=PO.PP.Sw.DualWater(1, 2, 2, 0.25, 0.05, 0.02, 0, 8, 1) [0.316227766, 0.316227766]
=PO.PP.Sw.DualWater(1, 2, 2, 0.25, 0.05, 0.02, 0.2, 5, 1) [0.277200187, 0.096500234]
=PO.PP.Sw.DualWater(1, 2, 2, 0.25, 0.05, 0.02, 0.2, 5, 2) [0.277200187, 0.096500234]
=PO.PP.Sw.DualWater(1, 2, 2.3, 0.25, 0.05, 0.02, 0.2, 5, 2) [0.343011482, 0.178764352]

Need a custom LAMBDA? Suggest a New Lambda