Tubing Movement LAMBDAs
Lubinski's four effects on tubing sealed in a packer: piston, ballooning, temperature and helical buckling.
4 lambdas
PO.CO.Tubing.Piston
Lubinski's piston effect: the force a pressure change at the packer puts on the end of a tubing string that seals in a packer bore, and the length change it causes if the tubing is free to move. Returns two cells: F1 = (Ap − Ai) ΔPi − (Ap − Ao) ΔPo lbf, then ΔL1 = −12 L F1 / (E As) in.
PO.CO.Tubing.Ballooning
Lubinski's ballooning effect: pressure inside the tubing swells it and shortens it (ballooning), pressure outside squeezes it and lengthens it (reverse ballooning). Returns the equivalent force and the free-tubing length change, from the changes of the average pressures. Returns two cells: F2 = 2ν (ΔPia Ai − ΔPoa Ao) lbf, then ΔL2 = −12 L F2 / (E As) in.
PO.CO.Tubing.Thermal
Lubinski's temperature effect: the length change of free tubing when its average temperature changes, and the force a packer takes when the tubing cannot move. Cooling (injection, a stimulation) shortens the tubing; heating (production) lengthens it. Returns two cells: F3 = −E β As ΔT lbf, then ΔL3 = 12 L β ΔT in.
PO.CO.Tubing.Buckling
Lubinski's buckling effect: tubing compressed above its packer coils into a helix against the casing and shortens. Returns the length change and the buckled length above the packer, from the fictitious force at the packer and a critical helical load. Returns two cells: ΔL4 = −r² (Ff² − F²low) / (8 E I w) in., then the buckled length (Ff − Flow) / W ft, both 0 when Ff ≤ Fcr.