Decline Diagnostics LAMBDAs
Loss-ratio derivatives and D(t) functions for identifying the governing decline model.
3 lambdas
PO.PE.Chan.WORDerivative
The time derivative of the water-oil ratio, WOR′ = dWOR/dt, at one point of a well's production history: the second curve of Chan's water-control diagnostic. Plotted with WOR against time on log-log axes, its trend tells the excess water's source. A WOR′ that keeps rising with a positive slope is near-wellbore channelling or a high-permeability layer watering out; a WOR′ whose slope turns negative after breakthrough, while WOR still climbs slowly, is bottom-water coning, the case a downhole water sink treats.
PO.RTA.NormalizedRate
Returns the pressure-normalized oil rate of rate-transient analysis, q/(pi − pwf): the oil rate over the drawdown from the initial reservoir pressure to the flowing bottomhole pressure. It is the y axis of the Blasingame and Agarwal-Gardner plots, and it puts a well whose flowing pressure changes (a choke change, a pump speed-up) back on one decline, which a rate alone can't. Its reciprocal, (pi − pwf)/q, is the inverse normalized pressure a flowing material balance fits against material-balance time (`PO.RTA.FlowingMB`). It works on one value or on whole columns of rates and flowing pressures.
PO.RTA.FlowingMB
Returns the oil in place a producing well has contacted, in STB, by the flowing material balance of Agarwal-Gardner and Mattar-Anderson. From each point's cumulative oil Np and rate q it forms the material-balance time tc = Np/q, fits the inverse normalized pressure (pi − pwf)/q against it with a straight line, and returns 1/(slope·ct). It needs no shut-in: the flowing pressures the well already records stand in for the average reservoir pressures a tank material balance asks for. Pass only the points in boundary-dominated flow; transient points sit off the line.