PO.RES.Vol.GRV

Gross rock volume of a reservoir from its area, its gross thickness and a geometric factor: the volume between the top and the base of the reservoir, or the top and the fluid contact, before net-to-gross and porosity are applied. A slab of uniform thickness has a factor of 1; a dome or a wedge that thins to the edge has less. Returns the gross rock volume in acre-ft, the unit `PO.RES.Vol.STOIIP` and `PO.RES.Vol.GIIP` take.

PO.RES.Vol.GRV.DepthArea

Gross rock volume from a table of planimetered contour areas: a structure map's areas against depth, or an isopach map's areas against thickness. Each pair of neighbouring contours bounds a slice, and the slices are summed by the trapezoidal rule, the pyramidal (frustum) rule, or the usual mix of the two, which takes the pyramidal rule where the smaller area is at most half the larger. Returns the gross rock volume in acre-ft, the unit `PO.RES.Vol.STOIIP` and `PO.RES.Vol.GIIP` take.

PO.RES.Vol.STOIIP

Volumetric oil in place: the hydrocarbon pore volume of the gross rock, net of shale and water, brought to stock-tank conditions with the oil formation volume factor. Returns STOIIP in stock-tank barrels (STB).

PO.RES.Vol.GIIP

Volumetric gas in place: the hydrocarbon pore volume of the gross rock, net of shale and water, brought to standard conditions with the gas formation volume factor. Returns GIIP in standard cubic feet (scf).

PO.RES.Vol.Recoverable

The part of a volume in place that a recovery factor says will be produced: STOIIP or GIIP times the recovery factor. Returns the recoverable volume in the unit of the volume in place (STB for STOIIP, scf for GIIP).

PO.RES.RF.Analogue

A first estimate of the primary oil recovery factor from the statistical correlations fitted to field histories: the API study of Arps and co-workers for solution-gas drive and for water drive, and Guthrie and Greenberger's water-drive regression. Use it where there is no production history to forecast from, and set it against the field analogues. Returns the recovery factor as a fraction of the oil initially in place.

PO.CCS.Capacity.DOE

The prospective CO2 storage resource of a saline formation by the volumetric method of the US Department of Energy (NETL): the formation's bulk volume and pore volume, filled with CO2 at reservoir density, scaled by a storage efficiency factor that says how much of that pore volume CO2 can actually reach. Returns the storage capacity in million tonnes of CO2 (Mt).

Need a custom LAMBDA? Request a Lambda