VFP Functions - Petroleum Office

PO.VFP.Ansari.dPdL

Calculates pressure gradient using Ansari et al. (1994) mechanistic model, [psi/ft]. TUFFP industry standard for vertical upward flow.

PO.VFP.Ansari.Pin

Calculates inlet pipe pressure using Ansari et al. (1994), [psi]. Vertical wells. Gas properties (ρg, μg, Bg) use DAK (Z-factor) and LGE (viscosity).

PO.VFP.Ansari.Pout

Calculates outlet pipe pressure using Ansari et al. (1994), [psi]. Vertical wells. Gas properties (ρg, μg, Bg) use DAK (Z-factor) and LGE (viscosity).

PO.VFP.Aziz.dPdL

Calculates pressure gradient using Aziz et al. (1972) drift-flux model, [psi/ft]. Vertical wells, basis for mechanistic models.

PO.VFP.Aziz.Pin

Calculates inlet pipe pressure using Aziz et al. (1972), [psi]. Vertical wells. Gas properties (ρg, μg, Bg) use DAK (Z-factor) and LGE (viscosity).

PO.VFP.Aziz.Pout

Calculates outlet pipe pressure using Aziz et al. (1972), [psi]. Vertical wells. Gas properties (ρg, μg, Bg) use DAK (Z-factor) and LGE (viscosity).

PO.VFP.BeggsBrill.dPdL

Calculates pressure gradient for multiphase pipe flow using Beggs and Brill (1973) correlation, [psi/ft]. Can be applied for any wellbore inclination and flow direction.

PO.VFP.BeggsBrill.Pin

Calculates inlet pipe pressure using Beggs and Brill (1973), [psi]. For any wellbore inclination. Gas properties (ρg, μg, Bg) use DAK (Z-factor) and LGE (viscosity).

PO.VFP.BeggsBrill.Pout

Calculates outlet pipe pressure using Beggs and Brill (1973), [psi]. For any wellbore inclination. Gas properties (ρg, μg, Bg) use DAK (Z-factor) and LGE (viscosity).

PO.VFP.DunsRos.dPdL

Calculates pressure gradient using Duns and Ros (1963) correlation, [psi/ft]. For vertical gas wells with liquid, high GOR wells.

PO.VFP.DunsRos.Pin

Calculates inlet pipe pressure using Duns and Ros (1963), [psi]. Vertical gas wells. Gas properties (ρg, μg, Bg) use DAK (Z-factor) and LGE (viscosity).

PO.VFP.DunsRos.Pout

Calculates outlet pipe pressure using Duns and Ros (1963), [psi]. Vertical gas wells. Gas properties (ρg, μg, Bg) use DAK (Z-factor) and LGE (viscosity).

PO.VFP.Gas.Pin

Calculates inlet pipe pressure for single phase pipe flow of gas (compressible fluid), [psi].

PO.VFP.Gas.Pout

Calculates outlet pipe pressure for single phase pipe flow of gas (compressible fluid), [psi].

PO.VFP.Gas.Re

Calculates Reynolds number for single phase pipe flow of gas (compressible fluid), [dimensionless].

PO.VFP.Gray.dPdL

Calculates pressure gradient for multiphase pipe flow using Gray (1974) correlation, [psi/ft]. Commonly used for gas wells that are also producing liquid.

PO.VFP.Gray.Pin

Calculates inlet pipe pressure using Gray (1974), [psi]. For gas wells producing liquid. Gas properties (ρg, μg, Bg) use DAK (Z-factor) and LGE (viscosity).

PO.VFP.Gray.Pout

Calculates outlet pipe pressure using Gray (1974), [psi]. For gas wells producing liquid. Gas properties (ρg, μg, Bg) use DAK (Z-factor) and LGE (viscosity).

Calculates pressure gradient for multiphase pipe flow using Hagedorn and Brown (1965) correlation with Griffith modification, [psi/ft]. Developed for vertical, upward flow and recommended only for near-vertical wellbores.

PO.VFP.HagedornBrown.Pin

Calculates inlet pipe pressure using Hagedorn and Brown (1965), [psi]. For vertical/near-vertical wells. Gas properties (ρg, μg, Bg) use DAK (Z-factor) and LGE (viscosity).

PO.VFP.HagedornBrown.Pout

Calculates outlet pipe pressure using Hagedorn and Brown (1965), [psi]. For vertical/near-vertical wells. Gas properties (ρg, μg, Bg) use DAK (Z-factor) and LGE (viscosity).

PO.VFP.HasanKabir.dPdL

Calculates pressure gradient using Hasan-Kabir (1988) mechanistic model, [psi/ft]. For deviated wells and annular geometry.

PO.VFP.HasanKabir.Pin

Calculates inlet pipe pressure using Hasan-Kabir (1988), [psi]. For deviated wells. Gas properties (ρg, μg, Bg) use DAK (Z-factor) and LGE (viscosity).

PO.VFP.HasanKabir.Pout

Calculates outlet pipe pressure using Hasan-Kabir (1988), [psi]. For deviated wells. Gas properties (ρg, μg, Bg) use DAK (Z-factor) and LGE (viscosity).

PO.VFP.Liq.dPfrc

Calculates frictional pressure drop from Fanning equation for single-phase flow of an incompressible, Newtonian fluid, [psi].

PO.VFP.Liq.dPgrv

Calculates potential energy pressure drop for single-phase flow of an incompressible, Newtonian fluid, [psi].

PO.VFP.Liq.Pin

Calculates inlet pipe pressure for single phase pipe flow of incompressible, Newtonian fluid, [psi].

PO.VFP.Liq.Pout

Calculates outlet pipe pressure for single phase pipe flow of incompressible, Newtonian fluid, [psi].

PO.VFP.Liq.Re

Calculates Reynolds number for single phase pipe flow of incompressible, Newtonian fluid, [dimensionless].

PO.VFP.MukherjeeBrill.dPdL

Calculates pressure gradient using Mukherjee-Brill (1985) correlation, [psi/ft]. For inclined wells, improvement over Beggs-Brill.

PO.VFP.MukherjeeBrill.Pin

Calculates inlet pipe pressure using Mukherjee-Brill (1985), [psi]. For inclined wells. Gas properties (ρg, μg, Bg) use DAK (Z-factor) and LGE (viscosity).

PO.VFP.MukherjeeBrill.Pout

Calculates outlet pipe pressure using Mukherjee-Brill (1985), [psi]. For inclined wells. Gas properties (ρg, μg, Bg) use DAK (Z-factor) and LGE (viscosity).

PO.VFP.Orkiszewski.dPdL

Calculates pressure gradient using Orkiszewski (1967) correlation, [psi/ft]. Vertical wells, widely used industry standard.

PO.VFP.Orkiszewski.Pin

Calculates inlet pipe pressure using Orkiszewski (1967), [psi]. Vertical wells. Gas properties (ρg, μg, Bg) use DAK (Z-factor) and LGE (viscosity).

PO.VFP.Orkiszewski.Pout

Calculates outlet pipe pressure using Orkiszewski (1967), [psi]. Vertical wells. Gas properties (ρg, μg, Bg) use DAK (Z-factor) and LGE (viscosity).

PO.VFP.PoettmannCarpenter.dPdL

Calculates pressure gradient using Poettmann-Carpenter (1952), [psi/ft]. Historical no-slip method for high-rate dispersed bubble flow.

PO.VFP.PoettmannCarpenter.Pin

Calculates inlet pipe pressure using Poettmann-Carpenter (1952), [psi]. No-slip method. Gas properties (ρg, μg, Bg) use DAK (Z-factor) and LGE (viscosity).

PO.VFP.PoettmannCarpenter.Pout

Calculates outlet pipe pressure using Poettmann-Carpenter (1952), [psi]. No-slip method. Gas properties (ρg, μg, Bg) use DAK (Z-factor) and LGE (viscosity).