ESP Hydraulics Functions
Head and pressure, pump performance, gas handling, curve fitting and viscosity correction.
41 functions
PO.ESP.Head.FromPressure
Converts pressure to head using fluid specific gravity, [ft].
PO.ESP.Head.ToPressure
Converts head to pressure using fluid specific gravity, [psi].
PO.ESP.Head.Static
Calculates static head from vertical depth, [ft].
PO.ESP.Head.PressureAtDepth
Calculates pressure at depth given surface pressure, [psi].
PO.ESP.TDH
Calculates Total Dynamic Head for ESP sizing, [ft].
PO.ESP.TDH.Full
Extended TDH calculation with IPR-based PIP, [ft].
PO.ESP.TDH.NetLift
Calculates net vertical lift (pump depth minus fluid level), [ft].
PO.ESP.HydraulicHP
Calculates theoretical hydraulic horsepower (bbl/d basis), [hp].
PO.ESP.HydraulicHP.GPM
Calculates theoretical hydraulic horsepower (gpm basis), [hp].
PO.ESP.BrakeHP
Calculates brake horsepower accounting for pump efficiency, [hp].
PO.ESP.BrakeHP.FromRate
Calculates brake horsepower directly from rate and head, [hp].
PO.ESP.Stages
Calculates required number of pump stages (rounded up), [stages].
PO.ESP.Stages.Actual
Returns exact (non-rounded) stage count for sensitivity analysis, [stages].
PO.ESP.Pump.TotalHead
Calculates total head from number of stages, [ft].
PO.ESP.Pump.TotalPower
Calculates total power from number of stages, [hp].
PO.ESP.Pump.Efficiency
Calculates pump efficiency from hydraulic and brake HP, [fraction].
PO.ESP.Pump.Pdis
Calculates pump discharge pressure, [psi].
PO.ESP.Pump.SG.Mix
Calculates composite SG for oil-water mixture, [dimensionless].
PO.ESP.Gas.Qg.Free
Calculates free gas rate at pump intake conditions, [rcf/d].
PO.ESP.Gas.Ql.Total
Calculates total liquid rate at pump intake, [bbl/d].
PO.ESP.Gas.Void
Calculates gas void fraction at pump intake, [fraction].
PO.ESP.Gas.Void.Full
Complete gas void fraction calculation from field data, [fraction].
PO.ESP.Gas.RhoMix
Calculates gas-liquid mixture density, [lb/ft3].
PO.ESP.Gas.Turpin.Factor
Calculates Turpin gas handling factor, [dimensionless].
PO.ESP.Gas.Dunbar.Factor
Calculates Dunbar gas correction factor, [dimensionless].
PO.ESP.Gas.Sep.Eff
Estimates rotary gas separator efficiency, [fraction].
PO.ESP.Gas.Void.PostSep
Calculates void fraction after gas separator, [fraction].
PO.ESP.Gas.Recommendation
Returns gas handling recommendation based on void fraction.
PO.ESP.Curve.Head
Interpolates head from pump performance curve, [ft/stage].
PO.ESP.Curve.Efficiency
Interpolates efficiency from pump performance curve, [fraction].
PO.ESP.Curve.Power
Interpolates power per stage from pump curve, [hp/stage].
PO.ESP.Curve.BEP
Returns Best Efficiency Point flow rate from pump curve, [bbl/d].
PO.ESP.Curve.BEP.Eff
Returns maximum efficiency value from pump curve, [fraction].
PO.ESP.Curve.InRange
Checks if operating point is within recommended range.
PO.ESP.Curve.Range.Status
Returns descriptive operating range status.
PO.ESP.Curve.CatalogueRange
Returns the first and last flow rate of the manufacturer curve, the range PO.ESP.Curve.Head, Efficiency and Power answer in without extrapolating; spills across a row (first, last), [bbl/d].
PO.ESP.Viscosity.Quick.Factor
Simplified viscosity correction for screening, [dimensionless].
PO.ESP.Viscosity.Head.Corr
Applies viscosity correction to head, [ft].
PO.ESP.Viscosity.Eff.Corr
Applies viscosity correction to efficiency, [fraction].
PO.ESP.Viscosity.Rate.Corr
Applies viscosity correction to flow rate, [gal[US]/min].
PO.ESP.Viscosity.Recommendation
Returns viscosity-based ESP recommendation.