PO.FRAC.Leakoff.Vol.SI
Description
Total leakoff volume from fracture, [m3] (SI units).
Formula
=LAMBDA(C, Sp, A, t, LET(
C_ft, PO.UnitConverter(C, "m", "ft"),
Sp_ft, PO.UnitConverter(Sp, "m", "ft"),
A_ft2, PO.UnitConverter(A, "m2", "ft2"),
result_bbl, PO.FRAC.Leakoff.Vol(C_ft, Sp_ft, A_ft2, t),
PO.UnitConverter(result_bbl, "bbl", "m3")))Parameters
| Parameter | Unit | Description |
|---|---|---|
C |
m/sqrt(min) | Total leakoff coefficient, [m/sqrt(min)] |
Sp |
m | Spurt loss, [m]. Use 0 if no spurt |
A |
m2 | Total fracture surface area (both faces), [m2] |
t |
- | Pumping time, [min] |
Examples
| Invocation | Expected |
|---|---|
=PO.FRAC.Leakoff.Vol.SI(0.001, 76.2, 929, 10) |
70795.47 |