PO.SF.PL.Liq.Pin
Description
Required inlet pressure for liquid pipeline, [psi].
Syntax
=PO.SF.PL.Liq.Pin(P_out, Ql, Rho_l, Ul, pipe_ID, pipe_length, pipe_roughness, dH)Parameters
| Parameter | Description |
|---|---|
| P_out | Desired outlet pressure, [psi]. |
| Ql | Liquid flow rate, [bbl/d]. |
| Rho_l | Liquid density, [lb/ft3]. |
| Ul | Liquid viscosity, [cP]. |
| pipe_ID | Pipe inner diameter, [in]. |
| pipe_length | Pipe length, [ft]. |
| pipe_roughness | Relative roughness (e/D), {1}. |
| dH | Elevation change (outlet-inlet), [ft]. |