PO.SF.PL.Liq.Rate.SI
Description
Liquid flow rate for given pressure drop using Darcy-Weisbach, [m3/d] (SI units).
Formula
=LAMBDA(dP, Rho_l, Ul, pipe_ID, pipe_length, pipe_roughness, LET(
dP_psi, PO.UnitConverter(dP, "kPa", "psi"),
Rho_l_lbft3, PO.UnitConverter(Rho_l, "kg/m3", "lb/ft3"),
pipe_ID_in, PO.UnitConverter(pipe_ID, "cm", "in"),
pipe_length_ft, PO.UnitConverter(pipe_length, "m", "ft"),
result_bbld, PO.SF.PL.Liq.Rate(dP_psi, Rho_l_lbft3, Ul, pipe_ID_in, pipe_length_ft, pipe_roughness),
PO.UnitConverter(result_bbld, "bbl/d", "m3/d")))Parameters
| Parameter | Unit | Description |
|---|---|---|
dP |
kPa | Available pressure drop, [kPa] |
Rho_l |
kg/m3 | Liquid density, [kg/m3] |
Ul |
- | Liquid viscosity, [cP] |
pipe_ID |
cm | Pipe inner diameter, [cm] |
pipe_length |
m | Pipe length, [m] |
pipe_roughness |
- | Relative roughness (e/D) |
Examples
| Invocation | Expected |
|---|---|
=PO.SF.PL.Liq.Rate.SI(3448, 800, 2, 6.35, 914.4, 0.0006) |
156.7959 |