PO.SF.PL.Liq.Pin.SI
Description
Required inlet pressure for liquid pipeline, [kPa] (SI units).
Formula
=LAMBDA(P_out, Ql, Rho_l, Ul, pipe_ID, pipe_length, pipe_roughness, dH, LET(
P_out_psi, PO.UnitConverter(P_out, "kPa", "psi"),
Ql_bbld, PO.UnitConverter(Ql, "m3/d", "bbl/d"),
Rho_l_lbft3, PO.UnitConverter(Rho_l, "kg/m3", "lb/ft3"),
pipe_ID_in, PO.UnitConverter(pipe_ID, "cm", "in"),
pipe_length_ft, PO.UnitConverter(pipe_length, "m", "ft"),
dH_ft, PO.UnitConverter(dH, "m", "ft"),
result_psi, PO.SF.PL.Liq.Pin(P_out_psi, Ql_bbld, Rho_l_lbft3, Ul, pipe_ID_in, pipe_length_ft, pipe_roughness, dH_ft),
PO.UnitConverter(result_psi, "psi", "kPa")))Parameters
| Parameter | Unit | Description |
|---|---|---|
P_out |
kPa | Desired outlet pressure, [kPa] |
Ql |
m3/d | Liquid flow rate, [m3/d] |
Rho_l |
kg/m3 | Liquid density, [kg/m3] |
Ul |
- | Liquid viscosity, [cP] |
pipe_ID |
cm | Pipe inner diameter, [cm] |
pipe_length |
m | Pipe length, [m] |
pipe_roughness |
- | Relative roughness (e/D) |
dH |
m | Elevation change (outlet-inlet), [m] |
Examples
| Invocation | Expected |
|---|---|
=PO.SF.PL.Liq.Pin.SI(6895, 159, 800, 2, 6.35, 914.4, 0.0006, 30.48) |
10668.66 |