Fluid Properties Templates
Black-oil correlations and equation-of-state models for oil, gas and water properties.
20 blueprints
Oil Properties
Bubble point, formation volume factor, solution gas-oil ratio, viscosity and density for black oil.
7 blueprintsGas Properties
Z factor, pseudo-critical properties, and gas density, viscosity and compressibility.
3 blueprintsWater Properties
Formation water volume factor, solution gas, compressibility, viscosity and salinity effects.
1 blueprintEoS Component Data
Pure-component properties and binary interaction coefficients for cubic equations of state.
2 blueprintsEoS Flash & Volumetrics
Flash and equilibrium calculations, volumetric properties and component fugacity.
2 blueprintsEoS Phase Behavior
Saturation pressures and phase envelope construction.
2 blueprintsFluid Model Setup
Build a fluid property table combining database components, SCN (Single Carbon Number) pseudo-components, and mixture molecular weight. This is the foundational step for all EoS calculations.
EoS Tuning Setup
Framework for EoS tuning by comparing calculated vs. observed bubble point pressures. The property table uses editable cells for Tc, Pc, omega, and Mw, enabling manual adjustment or Solver-based regression.
PVT Fluid Properties Report
Generate a complete PVT fluid property report below the bubble point using Standing (Rs, Bo, Pb) and Beggs-Robinson (viscosity) correlations. The pressure sweep table shows how solution GOR, oil FVF, and oil viscosity change during reservoir depletion.