PO.SIM.PHREEQC.RUN

Description

Runs a PHREEQC input against a database and spills how the run went: the database, PHREEQC's version and time, its SELECTED_OUTPUT tables, and its warnings.

Syntax

=PO.SIM.PHREEQC.RUN(input, [database])

Parameters

Parameter Description
input PHREEQC input, one line per row; a row's cells are joined with tabs, so a keyword, its number and each value can have a cell of their own. One cell holding the whole input works too.
database The thermodynamic database: phreeqc (the default), llnl, wateq4f, pitzer (for brines), sit or iso.

Related Functions

PO.SIM.MR3.RUN(deck)

Runs the network deck in Marlim3 and spills how the run went: the engine, the run kind, the time taken, how a network converged, and every value the binding supplied or replaced.

PO.SIM.PHREEQC.BUILD(waters, [phases], [mixing], [path])

Builds a PHREEQC input from water analyses, the minerals to watch, and an optional mixing series or temperature and pressure path, and spills it one line per row for the other PO.SIM.PHREEQC functions to read.

PO.SIM.PHREEQC.CHECK(input, [database])

Checks a PHREEQC input without running it: its title, the database, and every problem PHREEQC would refuse or silently accept, by cell and block.

PO.SIM.PHREEQC.SELECTED(input, [database], [user])

Runs a PHREEQC input against a database and spills one SELECTED_OUTPUT table as PHREEQC writes it: its headings, then a row per result.

PO.SIM.PHREEQC.SI(input, [database], [phases])

Runs a PHREEQC input against a database and spills its saturation indices long form: the columns that say which result a row is (sim, soln, step, …) and any values its USER_PUNCH writes, then phase | si, one row per result and phase.

PO.SIM.PHREEQC.TABLES.CHECK(waters, [phases], [mixing], [path])

Checks the tables PO.SIM.PHREEQC.BUILD reads: column headings, values, water names, the mixing series and the path, and each analysis's charge balance, naming the table and cell.

Missing a formula? Suggest a New Formula