---
id: po.wb.res.waterflood-surveillance
title: Waterflood Surveillance
summary: "Whether an injector is plugging or fracturing, whether a pattern's voidage is replaced and where a producer's water comes from and how much oil is left."
category: Reservoir
requires:
  - excel-365
tags:
  - waterflood
  - surveillance
  - hall-plot
  - voidage-replacement
  - wor
  - chan-diagnostic
---

## Description

Is the injector plugging or fracturing, is the pattern's voidage being replaced, and what do a producer's water-oil ratio trends say about its water and its remaining oil? You enter an injector's monthly days, pressure and rate, the pattern's allocated production and injection, a producer's oil and water rates and an oil price and cost deck. You read off the Hall-plot slopes and skins, the monthly and cumulative voidage replacement ratio, the Chan diagnostic, and the oil recovered when the WOR trend reaches its economic limit. Field units.

**How to use it:** Replace every synthetic monthly row with matched, quality-controlled field data: the injector's bottomhole injection pressure, days on injection and rate on the Injector sheet, and production allocated to the same pattern, with injected water and gas, on the Voidage sheet, using consistent fluid factors and units. Enter the producer's time from breakthrough and oil and water rates, and the economics, on the Producer sheet. Each table has 24 rows. Assess the pressure history and allocation before interpreting VRR, and for observational injector-producer comparisons match calendar dates and allocation first. The Summary places the observations side by side and lists every check; a failing check takes precedence over a warning. Needs Microsoft 365 or Excel 2024.

**Method:** The Hall integral is the cumulative pressure difference between the bottomhole injection pressure and the reservoir pressure times the injection days, plotted against cumulative water injected. Least-squares early and late slopes are fitted either side of the chosen split, and each slope gives a skin through steady radial flow between the wellbore and drainage radii. The monthly and cumulative VRR compare injected and produced reservoir volumes using the entered oil, water and gas formation volume factors and solution gas-oil ratio. The Producer sheet plots the WOR and its Chan derivative against time on log axes; it regresses log WOR against cumulative oil and extrapolates to an economic WOR at constant liquid rate and costs. The checks flag an invalid split or fit window, a slope change beyond the tolerance, pressure at the fracture limit, VRR outside the selected band, and diagnostic or trend concerns.

**Example:** Two independent synthetic examples. In the Hall pattern (24 monthly injection reports and allocated pattern production), the early and late slopes are 0.5542 and 0.3382 psi-day/STB and the cumulative VRR is 1.099; the slope, fracture-pressure and VRR checks warn at the default limits. In the separate 24-point DWS producer history, the Chan slope is -0.503 and the economic WOR trend reaches approximately 3.29 million STB. These examples are not a matched injector-producer pair and do not demonstrate a response between wells.

## Validity

The injector and voidage example and the producer example are independent; no response or causal connection between them is demonstrated, and the Summary places them together only for comparison. Elapsed days on the Voidage chart sum the reported injection days, not necessarily calendar time. Hall skin assumes steady radial flow and a representative reservoir pressure. Chan signatures are empirical indicators, not proof of a water source; the WOR extrapolation assumes the trend, liquid rate and economics persist and can be unreliable outside the fitted interval. No time forecast is made. Capacitance-resistance (CRM) connectivity between injectors and producers is not covered.

## References

- Hall, H.N. (1963). How to Analyse Waterflood Injection Well Performance. *World Oil*.
- Chan, K.S. (1995). Water Control Diagnostic Plots. SPE 30775.

## Inputs

| Input | Unit | Default | Name |
|---|---|---:|---|
| Permeability | mD | 50 | `WSI_K` |
| Net thickness | ft | 20 | `WSI_H` |
| Wellbore radius | ft | 0.3 | `WSI_Rw` |
| Drainage radius | ft | 660 | `WSI_Re` |
| Water viscosity | cp | 0.5 | `WSI_Muw` |
| Reservoir pressure | psi | 2000 | `WSI_Pe` |
| Fracture pressure | psi | 2575 | `WSI_Pfrac` |
| Oil FVF | rb/STB | 1.2 | `WSI_Bo` |
| Water FVF | rb/STB | 1.02 | `WSI_Bw` |
| Gas FVF | bbl/Mscf | 0.9 | `WSI_Bg` |
| Solution gas-oil ratio | scf/STB | 550 | `WSI_Rs` |
| Months in first segment | months | 12 | `WSI_Split` |
| Slope change tolerance | fraction | 0.2 | `WSI_SlopeTol` |
| VRR lower limit | fraction | 0.95 | `WSI_VrrLo` |
| VRR upper limit | fraction | 1.05 | `WSI_VrrHi` |
| Oil at breakthrough | STB | 400000 | `WSP_Np0` |
| First month of trend | month | 12 | `WSP_FitFrom` |
| Chan slope threshold | fraction | 0 | `WSP_SlopeConing` |
| Oil price | $/STB | 70 | `WSP_Price` |
| Royalty | fraction | 0.125 | `WSP_Royalty` |
| Production tax | fraction | 0.05 | `WSP_Tax` |
| Variable oil cost | $/STB | 6 | `WSP_Opex` |
| Fixed monthly cost | $/month | 25000 | `WSP_Fixed` |
| Liquid handling cost | $/STB | 3 | `WSP_Lift` |
| Oil initially in place | STB | 8000000 | `WSP_N` |
| Minimum trend R squared | fraction | 0.95 | `WSP_R2Min` |

The Injector table holds editable injection days, pressure and rate; the Voidage table editable allocated oil, water, gas and injected gas; the Producer table editable time from breakthrough and oil and water rates. All have 24 rows.

## Sheets

- `Guide` — what to read before using the workbook, its scope and assumptions, and the workflow.
- `Injector` — the injector and fluid inputs, the monthly injection table, the Hall plot, and the early and late slopes with their skins.
- `Voidage` — the pattern's monthly production and injection, and its monthly and cumulative VRR against elapsed injection days.
- `Producer` — an independent producer's history, the Chan WOR and derivative plot, and the WOR trend against cumulative oil to the economic limit.
- `Summary` — the independent observations side by side and every check under one verdict; a failure overrides a warning.
- `Test Cases` — the worked example and other cases, with expected and computed results.

## Functions used

Catalog LAMBDAs `PO.RES.Waterflood.Hall`, `PO.RES.Waterflood.VRR`, `PO.PE.Chan.WORDerivative`, and `PO.RES.Reserves.EconLimit` are installed in the workbook.
