---
id: po.wb.res.co2-storage
target: Co2Storage
kind: workbook
title: CO2 Storage Screening
summary: "How much CO2 a saline formation can hold, how many wells it takes to inject it and whether the average pressure stays below the fracture limit."
description: Screen saline-aquifer CO2 storage resources, injectivity and closed-aquifer pressure alongside an independent water-injector falloff test
version: 1.0.0
category: Reservoir
requires:
  - po-addin
  - excel-365
subcategory: carbon-capture-and-storage
tags:
  - ccs
  - co2
  - storage
  - injectivity
  - falloff
  - saline-aquifer
hubs:
  - res
  - pta
skills: []
composed: [po.bp.res.ccs.storage.capacity, po.bp.pta.injection.falloff]
worksheets: [Guide, Formation and trials, Capacity, Injectivity, Closed pressure, Falloff, Summary, Test Cases]
primary_outputs: [CCC_G50, CCC_P90, CCC_P50, CCC_P10, CCI_Wells, CCP_DP, CCP_FinalP, CCP_MaxMass, CCT_K, CCT_S, CCT_Pfe, CCX_Overall]
---

## Description

How much CO2 can a saline formation hold, how many wells does a project need to inject it, and does the average pressure stay below the fracture limit if the formation is closed? You enter the formation, its gradients, the storage efficiency percentiles and the injection plan. You read off the DOE and sampled P90, P50 and P10 resource, the wells needed, the closed-aquifer pressure rise and pressure-limited mass, and, from a separate water-injector test, permeability, skin and fracture extension pressure. Metric units; the falloff test is in field units.

**How to use it:** Enter the formation and project on the Formation and trials sheet; the pure-CO2 density and viscosity are worked out at the formation pressure and temperature. Read the DOE efficiency percentiles and the sampled exceedance percentiles on the Capacity sheet, then the steady radial screen on the Injectivity sheet. Enter the brine salinity and the site pore compressibility on the Closed pressure sheet and compare the final average pressure with the fracture-pressure limit. On the Falloff sheet, replace the model-derived injection pressure at shut-in with the measured one, and replace the synthetic water-injector gauge and step-rate data together; carry an interpreted permeability or skin across only after a unit and physical review. The Summary lists every check under one verdict. All inputs are illustrative and must be replaced for a real project.

**Method:** The formation pressure is 101.325 kPa plus the pore-pressure gradient times depth, and the temperature the surface temperature plus the geothermal gradient times depth. The DOE prospective resource of an open formation is G = A h φ ρCO2 E, with ρCO2 the pure-CO2 density (Span-Wagner) and E the storage efficiency. The efficiency is lognormal through the entered 10th and 90th percentiles, ln-mean (ln E10 + ln E90)/2 and ln-standard deviation (ln E90 − ln E10)/(2 z0.9), and deterministic stratified trials of it give the sampled exceedance percentiles. The injectivity screen is steady radial flow, q = 0.000535768 k krCO2 hinj Δp/(μ ln(re/rw)) in reservoir m3/d, with Δp the margin from the formation pressure to the allowed fraction of the fracture pressure and μ the CO2 viscosity (Fenghour); the mass rate per well is q ρCO2 × 365.25 days a year, and the wells are the project rate over it, rounded up. The closed-aquifer screen divides the injected reservoir volume by the pore volume times the total compressibility, the brine compressibility (Osif) plus the pore compressibility, to give a uniform average pressure rise; the pressure-limited mass is the margin to the limit times the pore volume, the total compressibility and the density. The independent water-injector example picks the radial window where the Bourdet derivative is flat, fits an MDH line to it for permeability and skin, takes Horner p* as the average pressure, flags a half-slope stretch as possible closure, and fits matrix and fracture lines to the step-rate test for the fracture extension pressure and rate.

**Example:** For the synthetic 500 km² formation at 1,500 m, the pure-CO2 density is approximately 618.42 kg/m³, the DOE median resource is 123.68 Mt, and the sampled P50 is 102.63 Mt. The open-boundary injectivity screen needs two wells for the 1 Mt/yr project. The closed screen gives a 5,709 kPa average rise, 21,110 kPa final average pressure and 39.7 Mt pressure-limited mass; it warns that the default temperature is outside Osif's documented range. These numbers are illustrative, not a site assessment.

## Validity

DOE resource is an open-formation prospective-resource estimate, not a closed pressure-limited capacity. The injectivity calculation assumes steady radial open-boundary flow and is not a closed pressure forecast. The closed screen assumes uniform pressure, no brine escape or displacement out of the formation, and constant density and compressibility; locally, injected CO2 displaces and compresses brine. Compare the average pressure with the fracture limit, but assess local wellbore pressure, geomechanics, plume migration, dissolution and brine migration separately. Osif's correlation is documented for 200–270°F, 1,000–20,000 psia and up to 200 g/L; the illustrative 140°F default is outside that temperature range and the pressure check warns. Near-critical pure-CO2 properties can be sensitive. Impure-CO2 equation-of-state flash is excluded. The water falloff and step-rate test is independent and is not a CO2 injection test. The add-in has no functions for a fractured vertical-well falloff model, a mobility-bank injection test, or Matthews–Brons–Hazebroek bounded-pattern average pressure.

## References

- DOE/NETL (2017). *Carbon Dioxide Storage Resource Assessment Methodology*. https://netl.doe.gov/sites/default/files/2018-10/CO2-SRU-Methodology-2017.pdf
- Zhou, Q., Birkholzer, J.T., Tsang, C.-F. and Rutqvist, J. (2008). A method for quick assessment of CO2 storage capacity in closed and semi-closed saline formations. *International Journal of Greenhouse Gas Control*, https://doi.org/10.1016/j.ijggc.2008.02.004 . The illustrative pore compressibility of 4.5e-10 Pa⁻¹ (4.5e-7 kPa⁻¹) is a separate literature assumption; replace it with site data.
- Osif, T.L. (1988). The Effects of Salt, Gas, Temperature, and Pressure on the Compressibility of Water. *SPE Reservoir Engineering*, SPE 16639.
- Earlougher, R.C. Jr. (1977). *Advances in Well Test Analysis*. SPE Monograph 5.

## Inputs

| Input | Unit | Default | Name |
|---|---|---|---|
| Formation area assessed | km² | 500 | `CCC_Area` |
| Gross thickness | m | 100 | `CCC_H` |
| Total porosity | fraction | 0.2 | `CCC_Phi` |
| Depth to the middle of the formation | m | 1,500 | `CCC_Z` |
| Pore-pressure gradient (hydrostatic brine) | kPa/m | 10.2 | `CCC_PGrad` |
| Mean surface (or seabed) temperature | °C | 15 | `CCC_TSurf` |
| Geothermal gradient | °C/km | 30 | `CCC_TGrad` |
| Storage efficiency, 10th, 50th and 90th percentile | fraction | 0.0051, 0.02, 0.054 | `CCC_E10`, `CCC_E50`, `CCC_E90` |
| Permeability | mD | 20 | `CCC_K` |
| CO2 relative permeability at the residual brine | fraction | 0.4 | `CCC_Kr` |
| Net thickness open to injection | m | 30 | `CCC_HInj` |
| Fracture-pressure gradient | kPa/m | 17 | `CCC_FGrad` |
| Fraction of the fracture pressure the well may reach | — | 0.9 | `CCC_SF` |
| Radius the pressure is held at the reservoir pressure | m | 1,000 | `CCC_Re` |
| Wellbore radius | m | 0.1 | `CCC_Rw` |
| Project injection rate | Mt/yr | 1 | `CCC_Rate` |
| Project injection period | years | 30 | `CCC_Years` |
| Number of trials, 10 to 1,000 | — | 300 | `CCC_n` |
| Permutation multiplier, no factor in common with the trials | — | 7 | `CCC_Mult` |
| Fewest trials for stable percentiles | — | 100 | `CCC_NMin` |
| Largest gap between the sampled and the DOE P90 and P10 | fraction | 0.02 | `CCC_Tol` |
| Lowest injection rate per well worth drilling for | Mt/yr | 0.25 | `CCC_MinRate` |
| Brine salinity | g/L | 35 | `CCP_Salinity` |
| Pore compressibility, illustrative | 1/kPa | 0.00000045 | `CCP_Cf` |
| Injection rate before shut-in | STB/d | 1,000 | `CCT_q` |
| Injection time before shut-in | h | 48 | `CCT_tp` |
| Water formation volume factor | bbl/STB | 1.02 | `CCT_Bw` |
| Water viscosity | cP | 0.5 | `CCT_mu` |
| Porosity | fraction | 0.2 | `CCT_phi` |
| Total compressibility | 1/psi | 1e-5 | `CCT_ct` |
| Wellbore radius | ft | 0.354 | `CCT_rw` |
| Net pay | ft | 50 | `CCT_h` |
| Injection pressure at shut-in | psi | model pressure at shut-in | `CCT_Pwf` |
| Bourdet smoothing window | log cycles | 0.2 | `CCT_L` |
| Slope tolerance about 0 (radial) and ½ (fracture) | — | 0.05 | `CCT_Tol` |
| Round trip: k recovered within ± | fraction | 0.05 | `CCT_KTol` |
| Steps on the matrix line (0 picks the best split) | — | 0 | `CCT_nlow` |
| Length of each rate step | h | 1 | `CCT_StepHr` |
| Model permeability | mD | 20 | `CCT_ModelK` |
| Model skin factor | — | 2 | `CCT_ModelS` |
| Initial reservoir pressure | psi | 3,000 | `CCT_Pi` |
| Wellbore storage coefficient | bbl/psi | 0.001 | `CCT_C` |
| Model fracture extension pressure | psi | 4,000 | `CCT_ModelPfe` |
| Above it, the rise as a fraction of the matrix's | — | 0.25 | `CCT_Frac` |

The Falloff sheet also holds the editable step rates (250 to 3,000 STB/d in eight steps) and the falloff gauge pressures.

## Sheets

- `Guide` — the workflow, the falloff models not included and the limits of the screen.
- `Formation and trials` — the formation, project and sampling inputs; the formation pressure and temperature, the pure-CO2 density and viscosity, the lognormal efficiency; and the deterministic stratified trials.
- `Capacity` — the whole-pore-volume mass, the DOE P10, P50 and P90 resource, the sampled P90, P50, P10 and mean, the years to fill the sampled P50, the phase, sampling and capacity checks, and the sampled exceedance curve.
- `Injectivity` — the pressure margin to the allowed fracture pressure, the reservoir volume and mass rate per well, and the wells needed.
- `Closed pressure` — brine and total compressibility, pore volume, injected reservoir volume, the average pressure rise, the final average pressure and the pressure-limited mass against the fracture limit.
- `Falloff` — an independent synthetic water-injector falloff and step-rate test: the radial window, semilog slope, permeability, skin, Horner p*, injectivity index, possible closure, and the fracture extension pressure and rate.
- `Summary` — the screening results and every check under one verdict.
- `Test Cases` — the worked example and other cases, with expected and computed results.

## Functions used

`PO.PVT.Rho.CO2.BySpanWagner`, `PO.PVT.U.CO2.ByFenghour`, `PO.CCS.Capacity.DOE`, `PO.RES.MC.Sample`, `PO.RES.MC.Percentiles`, `PO.PVT.Cw.UnSat.ByOsif`, `PO.PTA.Pw.VW`, `PO.PTA.Horner.Ratio`, `PO.DCA.Diag.Bourdet.SemiLog`, `PO.PTA.MDH.Fit`, `PO.PTA.StepRate.Fit`.
