---
id: po.wb.mbe.gas-material-balance
title: Gas Material Balance
summary: "How much gas a reservoir holds and will recover, from its p/z history checked for water drive and overpressure to a volumetric depletion forecast."
category: Reservoir
requires:
  - po-addin
  - excel-365
tags:
  - MBE
  - gas
  - material-balance
  - OGIP
  - geopressured
  - aquifer
  - Fetkovich
  - forecast
  - recovery-factor
---

## Description

How much gas is in place, how much will it give up, and is the reservoir really a volumetric tank? You enter the pressure surveys with Z and cumulative gas, water production, rock and water properties, the aquifer geometry and the wells. You read off the p/z OGIP and reserves, the Cole and overpressure diagnostics, an aquifer-supported OGIP with its spread, and a depletion forecast of rate, pressure and recovery over time. Field units; the example reservoir and aquifer are synthetic and do not match.

**How to use it:** Replace the surveys (time, pressure, Z and cumulative gas) on the Surveys and p-z sheet; the first row takes the initial pressure and Z. Enter the measured water production and the rock and water properties on the Cole diagnostic sheet, and review the PVT and rock data. Read the standard and modified p/z on the Geopressure sheet. On the Aquifer sheet, justify the aquifer history and geometry and inspect the OGIP spread. Review every diagnostic before using the Depletion forecast, and read the headlines and checks on the Summary.

**Method:** The p/z intercept gives OGIP; the initial and abandonment p/z give the recovery. Cole uses F = Gp Bg + Wp Bw, Eg = Bg - Bgi and Et = Eg + Efw; a rising F/Et trend suggests water drive, overpressure or an overstated initial pressure, a flat one depletion. The geopressure correction compares p/z with (p/z)(1 - ce(Pi - P)), with ce including rock and water compressibility. Fetkovich computes Wi, J, Wei and a stepwise We from the aquifer geometry and boundary pressure. The gas balance F = G Eg + We gives G = (F - We)/Eg, with Bg and Eg in rb/scf and G in scf. The forecast uses the p/z OGIP, DAK Z, 20 pressure steps, pseudo-steady-state deliverability and a plateau cap; each step's time uses the average of its two rates.

**Example:** At 4,500 psi and Z 0.92, five annual surveys reach 3,000 psi and 28 Bscf. Regression gives 76.802 Bscf OGIP and 68.791 Bscf reserves at 500 psi and Z 0.98. The aquifer's five observed production steps average 47.562 Bscf gas-only OGIP with a 22.40% spread, beyond the 5 % accepted as a match, so this aquifer does not explain the history; the extra year is excluded from the match statistics. The independent overpressured reference gives 131.420 and 100.118 Bscf standard and modified OGIP. Under volumetric depletion the forecast gives 68.331 Bscf at abandonment after 15.498 years.

## Validity

The p/z and forecast assume a volumetric tank; a straight line does not rule out an aquifer. Cole and modified p/z depend on the compressibilities and on stable pressure surveys. The Fetkovich gas-only balance omits rock and connate-water expansion; unlike Cole, it uses Eg, not Et, and is not the oil balance. The extra aquifer year repeats the last pressure and production; it is not a survey. The 9,500 psi geopressure example is independent of the reservoir analysed. The forecast assumes no influx and constant well properties, even when the drive checks warn; DAK initial Z differs from survey Z. A gas target outside zero to the abandonment recovery has no target pressure and fails its check. The history needs zero initial time and gas, positive pressure and Z, increasing times and nondecreasing gas. Any failing or unavailable check fails the overall verdict.

## References

- Dake, L.P. (1978). *Fundamentals of Reservoir Engineering*. Elsevier, chapters 3 and 9.
- Fetkovich, M.J. (1971). A Simplified Approach to Water Influx Calculations - Finite Aquifer Systems. *Journal of Petroleum Technology* 23(7), 814-828.
- Ramagost, B.P. and Farshad, F.F. (1981). P/Z Abnormally Pressured Gas Reservoirs. SPE 10125.
- Ahmed, T. (2010). *Reservoir Engineering Handbook*, 4th ed. Gulf Professional Publishing, chapter 13.

## Inputs

| Input | Unit | Default | Name |
|---|---|---|---|
| Initial pressure, initial Z-factor, abandonment pressure, abandonment Z-factor, single-survey OGIP scatter limit | psi, fraction | 4500, 0.92, 500, 0.98, 0.05 | `GMP_Pi`, `GMP_Zi`, `GMP_Pab`, `GMP_Zab`, `GMP_ScatterMax` |
| Pressure surveys: time, pressure, Z-factor and Gp | year, psi, Bscf | six survey rows | `GMP_Surveys` |
| Reservoir temperature, connate water saturation, water and formation compressibility, water formation volume factor, flatness tolerance | F, fraction, 1/psi, rb/STB | 160, 0.2, 3E-6, 4E-6, 1.02, 0.02 | `GMC_T`, `GMC_Swi`, `GMC_cw`, `GMC_cf`, `GMC_Bw`, `GMC_TrendMax` |
| Gas solubility slope dRsw/dp, OGIP scatter accepted as a straight line | scf/STB/psi, fraction | 0, 0.05 | `GMH_dRsw`, `GMH_ScatterMax` |
| Reference initial pressure, initial Z-factor, temperature and formation compressibility (independent overpressured reference) | psi, fraction, F, 1/psi | 9500, 1.35, 280, 1.5E-5 | `GMH_RefPi`, `GMH_Refzi`, `GMH_RefT`, `GMH_Refcf` |
| Aquifer permeability, thickness, porosity, outer radius, reservoir radius, encroachment angle, aquifer total compressibility, water viscosity | mD, ft, degrees, 1/psi, cP | 50, 50, 0.2, 15000, 3000, 360, 7E-6, 0.5 | `GMA_k`, `GMA_h`, `GMA_phi`, `GMA_ra`, `GMA_rr`, `GMA_theta`, `GMA_ct`, `GMA_Uw` |
| OGIP spread accepted as a match | fraction | 0.05 | `GMA_SpreadMax` |
| Gas specific gravity, permeability, net pay, drainage radius, wellbore radius, skin, producing wells | fraction, mD, ft | 0.75, 5, 50, 1490, 0.354, 0, 3 | `GMF_SG`, `GMF_k`, `GMF_h`, `GMF_re`, `GMF_rw`, `GMF_S`, `GMF_Wells` |
| Flowing bottomhole pressure limit, plateau rate (all wells), cumulative gas target | psi, Mscf/d, Bscf | 300, 20000, 40 | `GMF_Pwf`, `GMF_Plateau`, `GMF_GpT` |

## Sheets

- `Guide` — what the workbook answers, the order to work through its sheets and its assumptions.
- `Surveys and p-z` — the initial and abandonment conditions, the pressure surveys, the p/z regression to OGIP and reserves, each survey's OGIP scatter and the survey checks, with the p/z plot.
- `Cole diagnostic` — the linked surveys with water production, the gas and formation-water expansion terms, the F/Et ratios and the drive verdict, with the Cole plot.
- `Geopressure` — standard and modified p/z on the shared surveys with each OGIP and its straight-line check, and the separate 9,500 psi overpressured reference.
- `Aquifer` — the Fetkovich aquifer size, influx and gas-only OGIP at each survey step with their spread; the sixth year holds the last pressure and production constant.
- `Depletion forecast` — pseudo-critical properties, DAK Z, gas viscosity and well deliverability, a 20-step pressure, Z, production, rate and time profile, and the recovery, plateau and target pressure.
- `Summary` — the history, aquifer and forecast headlines and every check under one verdict.
- `Test Cases` — the worked example and other cases, with expected and computed results.

Charts show p/z regression, Cole ratios, standard and modified p/z, aquifer gas balance, and forecast rate and pressure versus time.

## Functions used

`PO.MBE.Gas.Pz`, `PO.MBE.Gas.OGIP`, `PO.MBE.Gas.OGIP.Reg`, `PO.MBE.Gas.URF`, `PO.MBE.Gas.RF`, `PO.MBE.Gas.ModPz`, `PO.MBE.Gas.ModOGIP`, `PO.MBE.Gas.PredGp`, `PO.MBE.Gas.PredP`, `PO.MBE.F.Gas`, `PO.MBE.Exp.Eg.Gas`, `PO.MBE.Exp.Efw`, `PO.MBE.Ce.Geopressured`, `PO.MBE.Aq.Fet.Wi`, `PO.MBE.Aq.Fet.J`, `PO.MBE.Aq.Fet.Wei`, `PO.MBE.Aq.Fet.We`, `PO.MBE.Aq.Fet.Pa`, `PO.PVT.Bg.ByDefinition`, `PO.PVT.Ppc.BySutton`, `PO.PVT.Tpc.BySutton`, `PO.PVT.Z.ByDAK`, `PO.PVT.Ug.ByLGE`, `PO.IPR.GW.PSS.Rate`.
