---
id: po.wb.de.casing-design
title: Casing Design
summary: "Where a well's casing seats go and whether each string holds its burst, collapse and tension loads, from pore and fracture pressure off a shale log."
category: Drilling
requires:
  - excel-365
tags:
  - drilling
  - casing-design
  - casing
  - pore-pressure
  - eaton
  - fracture-gradient
  - matthews-kelly
  - overburden
  - gardner
  - sonic
  - leak-off-test
  - mud-weight-window
  - casing-seat
  - burst
  - collapse
  - tension
  - triaxial
  - von-Mises
  - design-factor
  - load-case
  - buoyancy
  - API-5C3
---

## Description

Where should the casing shoes go, and does each string carry its burst, collapse and tension loads with the design factors your policy asks for? You enter a shale sonic or resistivity log, its normal trends, two leak-off tests, the shoe depths and margins, and each string's diameter, grade and two sections. You read off pore pressure, fracture gradient and the mud program by depth, whether each seat holds, and each string's burst, collapse, tension and triaxial design factors. Field units; no add-in needed.

**How to use it:** The well and its log are synthetic. Paste the shale depths, transit times and resistivities into the Pore Pressure sheet, pick the log to read, set the normal trends over a normally pressured interval, and calibrate Poisson's ratio to the area's leak-off tests. Check that both seats pass and that the narrowest mud-weight window is workable. Take the minimum design factors from the company's casing policy, enter each string's grade, weights and walls on the Casing sheet, and read each string's design factors and what it misses there; the Summary gathers the verdicts.

**Method:** Pore pressure by Eaton: Pp = Sv − (Sv − Pn)(Δtn/Δt)³ from the sonic, or with (R/Rn)^1.2 from the resistivity, the normal trends exponential in depth. The overburden integrates Gardner's bulk density ρb = 0.23 V^0.25. Fracture gradient: Eaton's Pp + ν/(1 − ν)(Sv − Pp) and Matthews and Kelly's Pp + Ki(Sv − Pp). A leak-off test gives the ν that fits it, (LOT − Pp)/(Sv + LOT − 2Pp). Each hole's mud is the most the pore pressure plus the trip margin needs, rounded up to 0.1 ppg; a seat passes when the next hole's mud plus the kick margin is under the fracture gradient at the shoe. Each string is loaded by working-stress cases: burst for gas to surface from the next TD's pore pressure (to 0.1 ppg) and for lost returns at the shoe's fracture pressure, both against a water backup; collapse for full evacuation against the mud. Ratings are API TR 5C3's burst, collapse (lowered by the buoyed tension) and pipe-body yield; the triaxial check is von Mises at the top joint's inner wall.

**Example:** The drilling family's reference well. Normal pressure 8.94 ppg; the overburden reaches 18.31 ppg at TD. Pore pressure 10.19 ppg at the 10,000 ft intermediate shoe and 13.60 ppg at 13,000 ft TD; Eaton's fracture gradient 14.41 ppg at the 4,000 ft surface shoe, 15.42 ppg at the intermediate (Matthews-Kelly 15.36) and 16.74 ppg at TD. Muds 9.3, 10.5 and 13.9 ppg; both seats hold; the narrowest window is 1.79 ppg at 10,500 ft. Eaton's line misses the 14.5 and 15.3 ppg leak-off tests by −0.09 and +0.12 ppg. Surface casing, 13⅜-in. L-80 68 lb/ft over 72 lb/ft from 3,000 ft: a 10.2 ppg kick at 10,000 ft leaves 4,304 psi at the wellhead, burst design factor 1.17; collapse 1.38 at the shoe. Intermediate, 9⅝-in. P-110 47 over 53.5 lb/ft from 8,000 ft (the same string as the casing blueprint): burst 1.20 at the top under 7,894 psi, collapse 1.20 at the crossover, tension 3.68, triaxial 1.50. Production, 7-in. P-110 29 over 32 lb/ft from 10,000 ft: burst 1.42, collapse 1.15 at TD under 9,396 psi of 13.9 ppg mud, tension 3.06, triaxial 1.75. Every string meets the minimum design factors of 1.1 burst, 1.125 collapse, 1.6 tension and 1.25 triaxial. Run the 47 lb/ft to 9,500 ft and its collapse design factor falls to 1.02, below the minimum.

## Validity

Eaton's method holds for shale under disequilibrium compaction; it under-reads unloading overpressure, where Bowers's unloading method is the alternative; the add-in has no function for it. Gardner's law overstates gas sands, salt and anhydrite. The fracture gradients are for a relaxed basin; with tectonic stress use a minimum horizontal stress from a stress model. Muds are static, with no ECD. The casing loads are uniaxial working-stress lines with constant gradients: the gas line is not capped at the shoe's fracture pressure (an upper bound), and the tension is the buoyed string hanging in one mud, without cement, temperature, ballooning, bending or running loads. The production string takes the same cases; its usual tubing-leak burst case on packer fluid is a named alternative. Ratings are the pipe body's; connections are separate. Named alternatives: the von Mises check at any depth for a full triaxial envelope, the partial-evacuation collapse case, and the pore-pressure blueprint's barite weight-up. Vertical well.

## References

- Eaton, B.A. (1975). "The Equation for Geopressure Prediction from Well Logs." SPE-5544.
- Eaton, B.A. (1969). "Fracture Gradient Prediction and Its Application in Oilfield Operations." *JPT* (October).
- Matthews, W.R. and Kelly, J. (1967). "How to Predict Formation Pressure and Fracture Gradient." *Oil and Gas Journal* (20 February).
- American Petroleum Institute (2008). *API TR 5C3 / ISO/TR 10400:2007* (burst, collapse, pipe-body yield, triaxial yield); API 5CT (casing dimensions and grades).
- Bourgoyne, A.T. et al. (1986). *Applied Drilling Engineering*. SPE Textbook Series Vol. 2, ch. 6 and 7.

## Inputs

| Input | Unit | Default | Name |
|---|---|---|---|
| Log the pore pressure is read from (Sonic or Resistivity, from a list) | — | Sonic | `PPW_Log` |
| Normal (hydrostatic) pore-pressure gradient | psi/ft | 0.465 | `PPW_Pn` |
| Sonic normal trend at the surface, Δtn = Δt0·e^(−c·z) | µs/ft | 170 | `PPW_Dt0` |
| Sonic normal trend's decay with depth, c | 1/ft | 6E-05 | `PPW_DtC` |
| Resistivity normal trend at the surface, Rn = R0·e^(b·z) | ohm·m | 0.6 | `PPW_R0` |
| Resistivity normal trend's growth with depth, b | 1/ft | 8E-05 | `PPW_RC` |
| Bulk density above the first log depth | g/cm³ | 1.95 | `PPW_RhoTop` |
| Gardner coefficient (velocity in ft/s) | — | 0.23 | `PPW_GA` |
| Gardner exponent | — | 0.25 | `PPW_GB` |
| Poisson's ratio for Eaton, calibrated to leak-off tests | — | 0.4 | `PPW_Nu` |
| Matthews-Kelly Ki at zero equivalent depth | — | 0.4 | `PPW_Ki0` |
| Matthews-Kelly Ki's rise per foot of equivalent depth | 1/ft | 3E-05 | `PPW_KiSlope` |
| Surface casing shoe (TVD) | ft | 4000 | `PPW_Shoe1` |
| Intermediate casing shoe (TVD) | ft | 10000 | `PPW_Shoe2` |
| Total depth of the production hole (TVD) | ft | 13000 | `PPW_TD` |
| Trip margin over the pore pressure | ppg | 0.3 | `PPW_Trip` |
| Kick margin under the fracture gradient | ppg | 0.5 | `PPW_Kick` |
| Depth of leak-off test 1 (TVD) | ft | 4000 | `PPW_Lot1Z` |
| Leak-off test 1, as an equivalent mud weight | ppg | 14.5 | `PPW_Lot1` |
| Depth of leak-off test 2 (TVD) | ft | 10000 | `PPW_Lot2Z` |
| Leak-off test 2, as an equivalent mud weight | ppg | 15.3 | `PPW_Lot2` |
| Largest misfit to a leak-off test accepted | ppg | 0.3 | `PPW_LotTol` |
| Shale log: depth, transit time and resistivity | ft, µs/ft, ohm·m | synthetic log | — |
| Casing outside diameter (surface, intermediate, production) | in. | 13.375, 9.625, 7 | `SRF_OD`, `INT_OD`, `PRD_OD` |
| Minimum yield strength of the grade | psi | 80,000 (L-80), 110,000 (P-110), 110,000 (P-110) | `SRF_Yp`, `INT_Yp`, `PRD_Yp` |
| Crossover from the upper to the lower section (TVD) | ft | 3000, 8000, 10000 | `SRF_Xover`, `INT_Xover`, `PRD_Xover` |
| Upper section's nominal weight | lb/ft | 68, 47, 29 | `SRF_W1`, `INT_W1`, `PRD_W1` |
| Upper section's wall thickness | in. | see the Casing sheet | `SRF_T1`, `INT_T1`, `PRD_T1` |
| Lower section's nominal weight | lb/ft | 72, 53.5, 32 | `SRF_W2`, `INT_W2`, `PRD_W2` |
| Lower section's wall thickness | in. | see the Casing sheet | `SRF_T2`, `INT_T2`, `PRD_T2` |
| Gas gradient for the gas-to-surface kick | psi/ft | 0.1 | `CDS_Ggas` |
| Water gradient: inside for lost returns, the backup outside | psi/ft | 0.465 | `CDS_Gw` |
| Overpull the top joint must allow over the hanging weight | lbf | 100000 | `CDS_Overpull` |
| Minimum design factor, burst | — | 1.1 | `CDS_DFb` |
| Minimum design factor, collapse | — | 1.125 | `CDS_DFc` |
| Minimum design factor, tension (pipe-body yield) | — | 1.6 | `CDS_DFt` |
| Minimum design factor, triaxial (von Mises) | — | 1.25 | `CDS_DFvm` |

## Sheets

- `Guide` — what the workbook does, where the inputs are and how the sheets connect.
- `Pore Pressure` — Eaton's pore pressure from a shale sonic or resistivity log, Gardner's overburden, Eaton's and Matthews and Kelly's fracture gradients calibrated to two leak-off tests, the mud program, and the seat and window checks, charted by depth.
- `Casing` — the surface, intermediate and production strings side by side, their shoes, muds, kicks and fracture pressures read from Pore Pressure: API TR 5C3 ratings, loads, design factors, overpull, a top-joint triaxial check and one verdict naming what each string misses.
- `Load Lines` — each string's burst and collapse loads against its ratings, charted by depth.
- `Summary` — the design basis and every check under one verdict.
- `Test Cases` — the worked example and other cases, with expected and computed results.

Four charts: the mud-weight window by depth, and each string's burst and collapse loads against its ratings.

## Functions used

Catalog LAMBDAs: `PO.DE.PP.Eaton`, `PO.DE.FG.Eaton`, `PO.DE.FG.MatthewsKelly`, `PO.GM.Density.Gardner`, `PO.GM.Stress.Overburden`, `PO.DE.Casing.Burst.API5C3`, `.Collapse.API5C3`, `.Axial.Yield`, `.LoadCase`, `.DesignFactor`, `.VonMises` and `PO.DE.TD.Buoyancy`. The alternatives under Validity: `PO.GM.Stress.MinHorizontal`, `PO.DE.Casing.VonMises` at any depth and `PO.DE.Casing.LoadCase` case 4 (partial evacuation).
