---
id: po.wb.dca.unconventional-rta
title: Unconventional Rate-Transient Analysis
summary: "Whether a tight-oil well has reached boundary-dominated flow, how much oil it contacts and what it will recover, from its monthly rates and flowing pressures."
category: Production
requires:
  - po-addin
  - excel-365
tags:
  - decline-curve-analysis
  - Duong
  - forecast
  - economic-limit
  - history-match
---

## Description

Has this tight-oil well reached boundary-dominated flow, how much oil does it contact, and what will it recover? You enter 24 monthly rates and flowing bottomhole pressures, the initial pressure and total compressibility. You read off a pressure-normalised rate-transient diagnostic, the contacted oil in place from flowing material balance, raw-rate decline diagnostics, and four empirical decline forecasts to one economic limit with their EURs. Time is in months for decline fits and days for material-balance time; rates are STB/d.

**How to use it:** On the RTA History sheet, enter monthly oil volume divided by producing days, together with representative measured flowing bottomhole pressure for the same period. Every rate must be positive and every pressure must be numeric, non-negative and below positive initial pressure. An invalid or missing rate disables the history-based diagnostics and forecasts; invalid drawdown disables pressure-normalised results. Use independently justified initial pressure, total compressibility and economic limit. Review the Summary failures, shut-ins, rate changes and measurement quality; the Summary shows every check.

**Method:** Normalise rate by drawdown, calculate cumulative oil and material-balance time Np/q, then read the slope of the derivative of inverse normalised rate against material-balance time. A late slope near one suggests boundary-dominated flow. A line through those months gives contacted oil in place at constant total compressibility. Raw-rate D(t), beta and b(t) are shown separately. Four models (Arps, Duong, the power-law exponential and the stretched exponential) are fitted to the same monthly raw rates with late-time weights and forecast to one economic limit.

**Example:** The synthetic pressure decreases from 3,000 to 1,000 psi in the first five months; raw rate rises for several months while normalised rate falls. The underlying response was constructed using 5 MMSTB and constant compressibility. Rounded synthetic rates do not imply measured field results.

## Validity

Raw-rate b(t) and D(t) assume constant or slowly varying flowing pressure; the example violates that assumption. Do not infer the physical regime solely from raw rates. Use the pressure-normalised derivative and material-balance line and investigate disagreement. Constant-compressibility oil material balance estimates contacted volume, not booked reserves. Empirical raw-rate forecasts can be biased by pressure changes and their apparent history match is not evidence of reliable extrapolation. Duong's infinite-time ultimate is finite only under the relevant parameter conditions; otherwise EUR depends on the economic limit. The workbook does not do Blasingame type-curve analysis; the add-in has no function for it.

## References

- Duong, A.N. (2011). Rate-Decline Analysis for Fracture-Dominated Shale Reservoirs. SPE Reservoir Evaluation & Engineering 14(3), 377-387.
- Arps, J.J. (1945). Analysis of Decline Curves. Transactions of the AIME 160, 228-247.

## Inputs

| Input | Unit | Default | Name |
|---|---|---|---|
| Monthly rate and flowing pressure | STB/d, psi | synthetic history | `URF_Q`, `URF_Pwf` |
| Initial pressure; total compressibility | psi, 1/psi | 5000, 0.000015 | `URF_Pi`, `URF_Ct` |
| Boundary-dominated derivative slope, first boundary-dominated month (0 = pick), minimum line R², minimum months on line | —, month, —, months | 0.9, 0, 0.98, 6 | `URF_SlopeBdf`, `URF_MUser`, `URF_R2Min`, `URF_MinPts` |
| Smoothing window (natural-log cycles); minimum line R² (Diagnostics) | — | 0.3, 0.98 | `URD_L`, `URD_R2Min` |
| Economic limit, maximum RMSE over mean rate, maximum EUR spread, grid step in months, weight exponent | STB/d, fraction, fraction, months, — | 15, 0.1, 0.25, 7, 1 | `URM_QEcon`, `URM_FitMax`, `URM_SpreadMax`, `URM_Step`, `URM_WPow` |

## Sheets

- `Guide` — how to use the workbook, its important limitation and its assumptions.
- `RTA History` — the 24-month rate and flowing-pressure history, pressure-normalised rate, material-balance time, the derivative that picks boundary-dominated flow, and the flowing material balance line with the contacted oil in place.
- `Diagnostics` — raw-rate D(t), beta and b(t) with a regime reading against editable thresholds; pressure-sensitive and not authoritative.
- `Forecast Models` — Arps, Duong, power-law exponential and stretched-exponential fits to the history with late-time weights, their history match, EURs and spread, the Duong tail, and the forecast grid.
- `Summary` — the overall verdict, the principal results and every check.
- `Test Cases` — the worked example and other cases, with expected and computed results.

## Functions used

`PO.RTA.NormalizedRate`, `PO.RTA.FlowingMB`, `PO.DCA.Diag.Bourdet`, `PO.DCA.Diag.Beta`, `PO.DCA.Diag.bParam`, `PO.DCA.Arps.WFit`, `PO.DCA.Duong.WFit`, `PO.DCA.PLE.WFit`, `PO.DCA.SEDM.WFit`, their Rate, Prod, EUR and Time functions, and `PO.Stats.RMSE`.
