---
cid: po.bp.pp.porosity.logs
hub: pp
tags: [petrophysics, porosity, density-porosity, neutron-porosity, density-neutron, gas-correction, sonic-porosity, Wyllie, Raymer-Hunt-Gardner, shale-correction, log-interpretation, quick-look]
facets: { discipline: reservoir, property: porosity, method-type: analytical }
title: Porosity from Logs
summary: "Computes shale-corrected porosity from density, neutron and sonic logs, with a gas correction, and shows where the logs disagree."
slug: po.pp.porosity.logs
type: worksheet
---

# Porosity from Logs

## Description

What is the zone's porosity, and do the density, neutron and sonic logs agree on it? You enter a log of gamma ray, bulk density, neutron and sonic, the matrix and fluid, the shale's readings and the zone. You read off each log's shale-corrected porosity at every depth and over the zone: density, neutron, density-neutron with a gas correction where the two cross over, and sonic by the Wyllie time average and by Raymer-Hunt-Gardner.

**Parameters:**
- **Matrix and fluid**: the matrix and fluid densities `PL_RhoMa`, `PL_RhoF` (g/cm³), their transit times `PL_DtMa`, `PL_DtF` (µs/ft), and the Raymer-Hunt-Gardner constant `PL_C`
- **Shale**: the gamma-ray picks `PL_GRcl`, `PL_GRsh` (API), and the shale's bulk density `PL_RhoSh` (g/cm³), neutron porosity `PL_NphiSh` and transit time `PL_DtSh` (µs/ft), which is also Wyllie's compaction correction
- **Zone and limits**: the gas crossover `PL_GasX`, the zone's top and base `PL_ZTop`, `PL_ZBase` (ft), the sonic agreement limit `PL_Agree` and the shale-volume limit `PL_VshCut`
- **Log**: depth, GR, bulk density, neutron and sonic in the log table, every 2 ft

**How to use it:** The neutron and sonic curves are made up; the gamma ray and density are the Well-Log Display workbook's synthetic log. Paste your depth, gamma ray, bulk density, neutron (on the sandstone matrix, or converted to it) and sonic over the log table, each environmentally corrected. Read the shale's density, neutron and transit time in a thick shale on the same log, and take the matrix from core or the lithology. The log track draws the five corrected porosities against depth: read where the sonic departs from the density-neutron and where the density reads above the neutron.

**Method:**

- **Shale volume.** IGR = (GR − GRcl) / (GRsh − GRcl), the linear gamma-ray index between the picks, kept between 0 and 1. The Shale Volume from Gamma Ray sheet compares the transforms.
- **Shale corrections.** Each log's shale correction takes off the shale volume times the shale's own porosity on that log, read in a thick shale. Density porosity is φD = (ρma − ρb) / (ρma − ρf). The neutron reads porosity directly on the sandstone matrix. The shale-corrected porosities are φD − Vsh φDsh and φN − Vsh φNsh, kept at or above 0, with φDsh = (ρma − ρsh) / (ρma − ρf).
- **Density-neutron.** A sample is flagged as gas when the corrected density porosity is more than the crossover above the corrected neutron, as gas makes them read. The density-neutron porosity is then the root-mean-square form √((φN² + φD²)/2), and elsewhere the mean (φN + φD)/2.
- **Sonic.** Wyllie's time average is φ = (Δt − Δtma) / (Δtf − Δtma) / Cp, with the compaction correction Cp = Δtsh/100. Raymer-Hunt-Gardner is φ = C (Δt − Δtma) / Δt. Each sonic porosity is corrected for shale with the shale's own porosity on the same transform.
- **Zone.** The zone's values are the means of its samples.
- **Checks.** The sonic agreement check warns when either sonic porosity is further from the density-neutron porosity than the agreement limit. The gas check warns when any of the zone's samples cross over. The shale correction check warns when the zone's shale volume is above the limit, where the corrections carry the answer.

**Example:** The default case is the Well-Log Display workbook's synthetic interval, 5,000 to 5,120 ft, sampled every 2 ft, with its gamma ray and bulk density. The workbook has no neutron or sonic log, so the sheet adds both, bed by bed, made to agree with the density once each is corrected for shale. The matrix is sandstone, 2.65 g/cm³ and 55.5 µs/ft, with 1.0 g/cm³ mud filtrate at 189 µs/ft. The shale reads 2.48 g/cm³, 36% neutron porosity and 110 µs/ft. The zone is the clean oil sand a foot inside its top and base, 5,013 to 5,033 ft. A crossover above 2 p.u. flags gas, and the sonic has to agree within 3 p.u.

The shale's density porosity is (2.65 − 2.48) / 1.65 = 10.3%. Its Wyllie porosity is (110 − 55.5) / 133.5 / 1.1 = 37.1%, and its Raymer-Hunt-Gardner porosity 0.67 × 54.5 / 110 = 33.2%. At 5,018 ft the gamma ray reads 29.5 API, under the clean line, so no shale is taken off. The density reads 2.212 g/cm³, a porosity of 0.438 / 1.65 = 26.5%. The neutron reads 27.0%, so the mean is 26.8%. The sonic reads 95 µs/ft: Wyllie gives 39.5 / 146.85 = 26.9% and Raymer-Hunt-Gardner 0.67 × 39.5 / 95 = 27.9%. Over the zone the mean shale volume is 0.043. The corrected density porosity is 25.9%, the neutron 25.6% and the density-neutron 25.7%. Wyllie reads 25.5% and Raymer-Hunt-Gardner 26.6%, both within 3 p.u., and no sample crosses over. Drop the crossover to 0 and the samples where the density reads above the neutron take the gas form: the gas check warns. In the shaly sand from 5,041 to 5,048 ft the mean shale volume is 0.39; against a 0.30 limit the shale check warns. A 0.5 p.u. agreement limit fails Raymer-Hunt-Gardner, 0.8 p.u. above.

## Validity

A single-mineral matrix: in a mixed lithology the density and neutron disagree without gas. The neutron is taken on the matrix the density uses. The shale corrections assume the shale in the sand reads like the thick shale; dispersed and laminated shale read differently, and in a sand with more than about 40% shale the corrections carry the answer. The gas form is the usual root-mean-square approximation for a hydrocarbon-bearing flushed zone; it does not correct for invasion or for the hydrogen index of the gas. The sonic reads intergranular porosity and misses vugs and fractures, so a sonic below the density-neutron points to secondary porosity, and one above it to an uncompacted sand or gas; Wyllie needs its compaction correction in young sands, which Raymer-Hunt-Gardner does without. The interval is synthetic, and its neutron and sonic are made to agree. Field units.

Named alternatives: a density-neutron crossplot or a multimineral solve for a mixed lithology; the Shale Volume from Gamma Ray sheet for a non-linear shale-volume transform.

## References

- Wyllie, M.R.J., Gregory, A.R. and Gardner, L.W. (1956). Elastic Wave Velocities in Heterogeneous and Porous Media. *Geophysics* 21(1), 41–70 (the time average).
- Raymer, L.L., Hunt, E.R. and Gardner, J.S. (1980). An Improved Sonic Transit Time-to-Porosity Transform. SPWLA 21st Annual Logging Symposium, paper P.
- Bassiouni, Z. (1994). *Theory, Measurement, and Interpretation of Well Logs*. SPE Textbook Series Vol. 4, ch. 12–14 (density, neutron and acoustic porosity, the shale corrections and the gas effect).
- Asquith, G. and Krygowski, D. (2004). *Basic Well Log Analysis*, 2nd ed. AAPG Methods in Exploration 16, ch. 4 (porosity logs and the density-neutron gas form).

## Functions used

`PO.PP.Vsh.GammaRayIndex`, `PO.PP.Porosity.FromDensity`, `PO.PP.Porosity.FromNeutronDensity`, `PO.PP.Porosity.FromSonic.Wyllie`, `PO.PP.Porosity.FromSonic.RHG`

## Spreadsheet: PorosityLogs

|     | A                                                                                                                                                                                                           | B                                                                              | C                                                                                                                                                                                                                                                                                                                                           | D        | E          | F                                                            | G                                                  | H                           | I                           | J                          | K                                                    | L                                                                                   | M                                                                      |
|-----|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|--------------------------------------------------------------------------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|----------|------------|--------------------------------------------------------------|----------------------------------------------------|-----------------------------|-----------------------------|----------------------------|------------------------------------------------------|-------------------------------------------------------------------------------------|------------------------------------------------------------------------|
| 1   | Porosity from Logs                                                                                                                                                                                          |                                                                                | Petroleum Office                                                                                                                                                                                                                                                                                                                            |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 2   | Blue cells on yellow are inputs. Set the matrix, fluid and shale readings and the zone; paste your own GR, density, neutron and sonic over the log below.                                                   |                                                                                |                                                                                                                                                                                                                                                                                                                                             |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 3   | Matrix, Fluid, the Shale's Readings and the Zone                                                                                                                                                            |                                                                                |                                                                                                                                                                                                                                                                                                                                             |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 4   | Matrix density (sandstone)                                                                                                                                                                                  | 2.65                                                                           | g/cm³                                                                                                                                                                                                                                                                                                                                       |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 5   | Fluid density (fresh mud filtrate)                                                                                                                                                                          | 1                                                                              | g/cm³                                                                                                                                                                                                                                                                                                                                       |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 6   | Matrix transit time (sandstone)                                                                                                                                                                             | 55.5                                                                           | µs/ft                                                                                                                                                                                                                                                                                                                                       |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 7   | Fluid transit time                                                                                                                                                                                          | 189                                                                            | µs/ft                                                                                                                                                                                                                                                                                                                                       |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 8   | Raymer-Hunt-Gardner constant (0.67 for liquid, 0.6 for gas)                                                                                                                                                 | 0.67                                                                           | —                                                                                                                                                                                                                                                                                                                                           |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 9   | Clean-sand gamma ray (Vsh = 0)                                                                                                                                                                              | 30                                                                             | API                                                                                                                                                                                                                                                                                                                                         |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 10  | Shale gamma ray (Vsh = 1)                                                                                                                                                                                   | 115                                                                            | API                                                                                                                                                                                                                                                                                                                                         |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 11  | Shale bulk density, read in a thick shale                                                                                                                                                                   | 2.48                                                                           | g/cm³                                                                                                                                                                                                                                                                                                                                       |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 12  | Shale neutron porosity                                                                                                                                                                                      | 0.36                                                                           | %                                                                                                                                                                                                                                                                                                                                           |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 13  | Shale transit time (also Wyllie's Δtsh/100)                                                                                                                                                                 | 110                                                                            | µs/ft                                                                                                                                                                                                                                                                                                                                       |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 14  | Crossover that flags gas: density less neutron porosity above                                                                                                                                               | 0.02                                                                           | %                                                                                                                                                                                                                                                                                                                                           |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 15  | Zone top (the clean oil sand, a foot inside its top)                                                                                                                                                        | 5013                                                                           | ft                                                                                                                                                                                                                                                                                                                                          |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 16  | Zone base (a foot inside the bed's base)                                                                                                                                                                    | 5033                                                                           | ft                                                                                                                                                                                                                                                                                                                                          |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 17  | Agreement limit, sonic against density-neutron porosity                                                                                                                                                     | 0.03                                                                           | %                                                                                                                                                                                                                                                                                                                                           |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 18  | Shale-volume limit for small shale corrections                                                                                                                                                              | 0.4                                                                            | v/v                                                                                                                                                                                                                                                                                                                                         |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 20  | The Shale's Porosities and the Zone's Shale-Corrected Porosity by Each Log                                                                                                                                  |                                                                                |                                                                                                                                                                                                                                                                                                                                             |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 21  | Shale density porosity                                                                                                                                                                                      | =PO.PP.Porosity.FromDensity(PL_RhoMa,PL_RhoSh,PL_RhoF)                         | %                                                                                                                                                                                                                                                                                                                                           |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 22  | Shale sonic porosity, Wyllie                                                                                                                                                                                | =PO.PP.Porosity.FromSonic.Wyllie(PL_DtSh,PL_DtMa,PL_DtF,PL_DtSh)               | %                                                                                                                                                                                                                                                                                                                                           |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 23  | Shale sonic porosity, Raymer-Hunt-Gardner                                                                                                                                                                   | =PO.PP.Porosity.FromSonic.RHG(PL_DtSh,PL_DtMa,PL_C)                            | %                                                                                                                                                                                                                                                                                                                                           |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 24  | Zone mean shale volume (linear gamma-ray index)                                                                                                                                                             | =AVERAGEIFS($F$42:$F$102,$A$42:$A$102,">="&PL_ZTop,$A$42:$A$102,"<="&PL_ZBase) | v/v                                                                                                                                                                                                                                                                                                                                         |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 25  | Zone density porosity, shale-corrected                                                                                                                                                                      | =AVERAGEIFS($H$42:$H$102,$A$42:$A$102,">="&PL_ZTop,$A$42:$A$102,"<="&PL_ZBase) | %                                                                                                                                                                                                                                                                                                                                           |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 26  | Zone neutron porosity, shale-corrected                                                                                                                                                                      | =AVERAGEIFS($I$42:$I$102,$A$42:$A$102,">="&PL_ZTop,$A$42:$A$102,"<="&PL_ZBase) | %                                                                                                                                                                                                                                                                                                                                           |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 27  | Zone density-neutron porosity                                                                                                                                                                               | =AVERAGEIFS($K$42:$K$102,$A$42:$A$102,">="&PL_ZTop,$A$42:$A$102,"<="&PL_ZBase) | %                                                                                                                                                                                                                                                                                                                                           |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 28  | Zone sonic porosity, Wyllie, shale-corrected                                                                                                                                                                | =AVERAGEIFS($L$42:$L$102,$A$42:$A$102,">="&PL_ZTop,$A$42:$A$102,"<="&PL_ZBase) | %                                                                                                                                                                                                                                                                                                                                           |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 29  | Zone sonic porosity, Raymer-Hunt-Gardner, shale-corrected                                                                                                                                                   | =AVERAGEIFS($M$42:$M$102,$A$42:$A$102,">="&PL_ZTop,$A$42:$A$102,"<="&PL_ZBase) | %                                                                                                                                                                                                                                                                                                                                           |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 30  | Zone samples that cross over (gas form used)                                                                                                                                                                | =COUNTIFS($J$42:$J$102,1,$A$42:$A$102,">="&PL_ZTop,$A$42:$A$102,"<="&PL_ZBase) | —                                                                                                                                                                                                                                                                                                                                           |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 31  | Wyllie less density-neutron porosity                                                                                                                                                                        | =PL_PhiW-PL_PhiND                                                              | %                                                                                                                                                                                                                                                                                                                                           |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 32  | Raymer-Hunt-Gardner less density-neutron porosity                                                                                                                                                           | =PL_PhiR-PL_PhiND                                                              | %                                                                                                                                                                                                                                                                                                                                           |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 33  | Sonic agreement check                                                                                                                                                                                       | =IF(MAX(ABS(PL_DiffW),ABS(PL_DiffR))<=PL_Agree,"PASS","WARN")                  | =IF(MAX(ABS(PL_DiffW),ABS(PL_DiffR))<=PL_Agree,"both sonic porosities are within "&FIXED(PL_Agree*100,1)&" p.u. of the density-neutron porosity","a sonic porosity is more than "&FIXED(PL_Agree*100,1)&" p.u. from the density-neutron porosity: secondary porosity if it reads low, an uncompacted or gas-bearing sand if it reads high") |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 34  | Gas check                                                                                                                                                                                                   | =IF(PL_Gas=0,"PASS","WARN")                                                    | =IF(PL_Gas=0,"no density-neutron crossover in the zone, so the mean of the two porosities is used",""&PL_Gas&" of the zone's samples cross over by more than "&FIXED(PL_GasX*100,1)&" p.u.: gas, so the root-mean-square form is used on them")                                                                                             |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 35  | Shale correction check                                                                                                                                                                                      | =IF(PL_Vsh<=PL_VshCut,"PASS","WARN")                                           | =IF(PL_Vsh<=PL_VshCut,"the zone's shale volume of "&FIXED(PL_Vsh,2)&" is within "&FIXED(PL_VshCut,2)&", so the shale corrections are small","the zone's shale volume of "&FIXED(PL_Vsh,2)&" is above "&FIXED(PL_VshCut,2)&": the corrections dominate the porosity, so pick the shale's readings with care")                                |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 37  | How to use it: paste your depth, GR, bulk density, neutron (on the sandstone matrix) and sonic over the log table, environmentally corrected, and read the shale's values in a thick shale on the same log. |                                                                                |                                                                                                                                                                                                                                                                                                                                             |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 38  | The log is synthetic: the log display workbook's interval, with neutron and sonic curves made to agree with its density.                                                                                    |                                                                                |                                                                                                                                                                                                                                                                                                                                             |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 40  | Log: Readings and Porosity by Depth (the log display workbook's interval every 2 ft)                                                                                                                        |                                                                                |                                                                                                                                                                                                                                                                                                                                             |          |            |                                                              |                                                    |                             |                             |                            |                                                      |                                                                                     |                                                                        |
| 41  | Depth (ft)                                                                                                                                                                                                  | GR (API)                                                                       | RHOB (g/cm³)                                                                                                                                                                                                                                                                                                                                | NPHI (%) | DT (µs/ft) | Vsh (v/v)                                                    | Density (%)                                        | Density, corr. (%)          | Neutron, corr. (%)          | Gas flag                   | Density-neutron (%)                                  | Wyllie, corr. (%)                                                                   | RHG, corr. (%)                                                         |
| 42  | 5000                                                                                                                                                                                                        | 111.3                                                                          | 2.479                                                                                                                                                                                                                                                                                                                                       | 0.36     | 109.2      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B42,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C42,PL_RhoF)  | =MAX(0,G42-F42*PL_PhiDsh)   | =MAX(0,D42-F42*PL_NphiSh)   | =IF(H42-I42>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I42,H42,J42+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E42,PL_DtMa,PL_DtF,PL_DtSh)-F42*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E42,PL_DtMa,PL_C)-F42*PL_PhiRsh)   |
| 43  | 5002                                                                                                                                                                                                        | 116.4                                                                          | 2.482                                                                                                                                                                                                                                                                                                                                       | 0.362    | 110.4      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B43,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C43,PL_RhoF)  | =MAX(0,G43-F43*PL_PhiDsh)   | =MAX(0,D43-F43*PL_NphiSh)   | =IF(H43-I43>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I43,H43,J43+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E43,PL_DtMa,PL_DtF,PL_DtSh)-F43*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E43,PL_DtMa,PL_C)-F43*PL_PhiRsh)   |
| 44  | 5004                                                                                                                                                                                                        | 114.4                                                                          | 2.475                                                                                                                                                                                                                                                                                                                                       | 0.356    | 109.8      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B44,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C44,PL_RhoF)  | =MAX(0,G44-F44*PL_PhiDsh)   | =MAX(0,D44-F44*PL_NphiSh)   | =IF(H44-I44>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I44,H44,J44+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E44,PL_DtMa,PL_DtF,PL_DtSh)-F44*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E44,PL_DtMa,PL_C)-F44*PL_PhiRsh)   |
| 45  | 5006                                                                                                                                                                                                        | 113.2                                                                          | 2.481                                                                                                                                                                                                                                                                                                                                       | 0.365    | 110.6      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B45,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C45,PL_RhoF)  | =MAX(0,G45-F45*PL_PhiDsh)   | =MAX(0,D45-F45*PL_NphiSh)   | =IF(H45-I45>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I45,H45,J45+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E45,PL_DtMa,PL_DtF,PL_DtSh)-F45*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E45,PL_DtMa,PL_C)-F45*PL_PhiRsh)   |
| 46  | 5008                                                                                                                                                                                                        | 114.2                                                                          | 2.476                                                                                                                                                                                                                                                                                                                                       | 0.356    | 109.4      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B46,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C46,PL_RhoF)  | =MAX(0,G46-F46*PL_PhiDsh)   | =MAX(0,D46-F46*PL_NphiSh)   | =IF(H46-I46>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I46,H46,J46+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E46,PL_DtMa,PL_DtF,PL_DtSh)-F46*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E46,PL_DtMa,PL_C)-F46*PL_PhiRsh)   |
| 47  | 5010                                                                                                                                                                                                        | 108.4                                                                          | 2.462                                                                                                                                                                                                                                                                                                                                       | 0.354    | 109.4      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B47,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C47,PL_RhoF)  | =MAX(0,G47-F47*PL_PhiDsh)   | =MAX(0,D47-F47*PL_NphiSh)   | =IF(H47-I47>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I47,H47,J47+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E47,PL_DtMa,PL_DtF,PL_DtSh)-F47*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E47,PL_DtMa,PL_C)-F47*PL_PhiRsh)   |
| 48  | 5012                                                                                                                                                                                                        | 73.9                                                                           | 2.339                                                                                                                                                                                                                                                                                                                                       | 0.313    | 102.9      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B48,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C48,PL_RhoF)  | =MAX(0,G48-F48*PL_PhiDsh)   | =MAX(0,D48-F48*PL_NphiSh)   | =IF(H48-I48>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I48,H48,J48+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E48,PL_DtMa,PL_DtF,PL_DtSh)-F48*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E48,PL_DtMa,PL_C)-F48*PL_PhiRsh)   |
| 49  | 5014                                                                                                                                                                                                        | 35.2                                                                           | 2.237                                                                                                                                                                                                                                                                                                                                       | 0.279    | 95.8       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B49,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C49,PL_RhoF)  | =MAX(0,G49-F49*PL_PhiDsh)   | =MAX(0,D49-F49*PL_NphiSh)   | =IF(H49-I49>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I49,H49,J49+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E49,PL_DtMa,PL_DtF,PL_DtSh)-F49*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E49,PL_DtMa,PL_C)-F49*PL_PhiRsh)   |
| 50  | 5016                                                                                                                                                                                                        | 36.1                                                                           | 2.209                                                                                                                                                                                                                                                                                                                                       | 0.267    | 95.6       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B50,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C50,PL_RhoF)  | =MAX(0,G50-F50*PL_PhiDsh)   | =MAX(0,D50-F50*PL_NphiSh)   | =IF(H50-I50>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I50,H50,J50+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E50,PL_DtMa,PL_DtF,PL_DtSh)-F50*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E50,PL_DtMa,PL_C)-F50*PL_PhiRsh)   |
| 51  | 5018                                                                                                                                                                                                        | 29.5                                                                           | 2.212                                                                                                                                                                                                                                                                                                                                       | 0.27     | 95         | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B51,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C51,PL_RhoF)  | =MAX(0,G51-F51*PL_PhiDsh)   | =MAX(0,D51-F51*PL_NphiSh)   | =IF(H51-I51>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I51,H51,J51+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E51,PL_DtMa,PL_DtF,PL_DtSh)-F51*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E51,PL_DtMa,PL_C)-F51*PL_PhiRsh)   |
| 52  | 5020                                                                                                                                                                                                        | 33.4                                                                           | 2.21                                                                                                                                                                                                                                                                                                                                        | 0.271    | 95.5       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B52,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C52,PL_RhoF)  | =MAX(0,G52-F52*PL_PhiDsh)   | =MAX(0,D52-F52*PL_NphiSh)   | =IF(H52-I52>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I52,H52,J52+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E52,PL_DtMa,PL_DtF,PL_DtSh)-F52*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E52,PL_DtMa,PL_C)-F52*PL_PhiRsh)   |
| 53  | 5022                                                                                                                                                                                                        | 31.1                                                                           | 2.214                                                                                                                                                                                                                                                                                                                                       | 0.266    | 94.3       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B53,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C53,PL_RhoF)  | =MAX(0,G53-F53*PL_PhiDsh)   | =MAX(0,D53-F53*PL_NphiSh)   | =IF(H53-I53>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I53,H53,J53+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E53,PL_DtMa,PL_DtF,PL_DtSh)-F53*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E53,PL_DtMa,PL_C)-F53*PL_PhiRsh)   |
| 54  | 5024                                                                                                                                                                                                        | 35                                                                             | 2.209                                                                                                                                                                                                                                                                                                                                       | 0.271    | 96.1       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B54,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C54,PL_RhoF)  | =MAX(0,G54-F54*PL_PhiDsh)   | =MAX(0,D54-F54*PL_NphiSh)   | =IF(H54-I54>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I54,H54,J54+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E54,PL_DtMa,PL_DtF,PL_DtSh)-F54*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E54,PL_DtMa,PL_C)-F54*PL_PhiRsh)   |
| 55  | 5026                                                                                                                                                                                                        | 29.8                                                                           | 2.21                                                                                                                                                                                                                                                                                                                                        | 0.268    | 94.3       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B55,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C55,PL_RhoF)  | =MAX(0,G55-F55*PL_PhiDsh)   | =MAX(0,D55-F55*PL_NphiSh)   | =IF(H55-I55>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I55,H55,J55+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E55,PL_DtMa,PL_DtF,PL_DtSh)-F55*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E55,PL_DtMa,PL_C)-F55*PL_PhiRsh)   |
| 56  | 5028                                                                                                                                                                                                        | 34                                                                             | 2.216                                                                                                                                                                                                                                                                                                                                       | 0.272    | 95.2       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B56,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C56,PL_RhoF)  | =MAX(0,G56-F56*PL_PhiDsh)   | =MAX(0,D56-F56*PL_NphiSh)   | =IF(H56-I56>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I56,H56,J56+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E56,PL_DtMa,PL_DtF,PL_DtSh)-F56*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E56,PL_DtMa,PL_C)-F56*PL_PhiRsh)   |
| 57  | 5030                                                                                                                                                                                                        | 34                                                                             | 2.208                                                                                                                                                                                                                                                                                                                                       | 0.266    | 94.8       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B57,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C57,PL_RhoF)  | =MAX(0,G57-F57*PL_PhiDsh)   | =MAX(0,D57-F57*PL_NphiSh)   | =IF(H57-I57>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I57,H57,J57+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E57,PL_DtMa,PL_DtF,PL_DtSh)-F57*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E57,PL_DtMa,PL_C)-F57*PL_PhiRsh)   |
| 58  | 5032                                                                                                                                                                                                        | 37.5                                                                           | 2.234                                                                                                                                                                                                                                                                                                                                       | 0.282    | 96.5       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B58,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C58,PL_RhoF)  | =MAX(0,G58-F58*PL_PhiDsh)   | =MAX(0,D58-F58*PL_NphiSh)   | =IF(H58-I58>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I58,H58,J58+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E58,PL_DtMa,PL_DtF,PL_DtSh)-F58*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E58,PL_DtMa,PL_C)-F58*PL_PhiRsh)   |
| 59  | 5034                                                                                                                                                                                                        | 74.7                                                                           | 2.344                                                                                                                                                                                                                                                                                                                                       | 0.312    | 101.8      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B59,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C59,PL_RhoF)  | =MAX(0,G59-F59*PL_PhiDsh)   | =MAX(0,D59-F59*PL_NphiSh)   | =IF(H59-I59>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I59,H59,J59+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E59,PL_DtMa,PL_DtF,PL_DtSh)-F59*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E59,PL_DtMa,PL_C)-F59*PL_PhiRsh)   |
| 60  | 5036                                                                                                                                                                                                        | 108.7                                                                          | 2.463                                                                                                                                                                                                                                                                                                                                       | 0.354    | 108.7      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B60,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C60,PL_RhoF)  | =MAX(0,G60-F60*PL_PhiDsh)   | =MAX(0,D60-F60*PL_NphiSh)   | =IF(H60-I60>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I60,H60,J60+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E60,PL_DtMa,PL_DtF,PL_DtSh)-F60*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E60,PL_DtMa,PL_C)-F60*PL_PhiRsh)   |
| 61  | 5038                                                                                                                                                                                                        | 112.2                                                                          | 2.461                                                                                                                                                                                                                                                                                                                                       | 0.354    | 109.3      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B61,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C61,PL_RhoF)  | =MAX(0,G61-F61*PL_PhiDsh)   | =MAX(0,D61-F61*PL_NphiSh)   | =IF(H61-I61>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I61,H61,J61+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E61,PL_DtMa,PL_DtF,PL_DtSh)-F61*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E61,PL_DtMa,PL_C)-F61*PL_PhiRsh)   |
| 62  | 5040                                                                                                                                                                                                        | 85.4                                                                           | 2.41                                                                                                                                                                                                                                                                                                                                        | 0.328    | 103.7      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B62,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C62,PL_RhoF)  | =MAX(0,G62-F62*PL_PhiDsh)   | =MAX(0,D62-F62*PL_NphiSh)   | =IF(H62-I62>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I62,H62,J62+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E62,PL_DtMa,PL_DtF,PL_DtSh)-F62*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E62,PL_DtMa,PL_C)-F62*PL_PhiRsh)   |
| 63  | 5042                                                                                                                                                                                                        | 69.7                                                                           | 2.338                                                                                                                                                                                                                                                                                                                                       | 0.294    | 100        | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B63,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C63,PL_RhoF)  | =MAX(0,G63-F63*PL_PhiDsh)   | =MAX(0,D63-F63*PL_NphiSh)   | =IF(H63-I63>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I63,H63,J63+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E63,PL_DtMa,PL_DtF,PL_DtSh)-F63*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E63,PL_DtMa,PL_C)-F63*PL_PhiRsh)   |
| 64  | 5044                                                                                                                                                                                                        | 59.9                                                                           | 2.33                                                                                                                                                                                                                                                                                                                                        | 0.291    | 98.7       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B64,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C64,PL_RhoF)  | =MAX(0,G64-F64*PL_PhiDsh)   | =MAX(0,D64-F64*PL_NphiSh)   | =IF(H64-I64>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I64,H64,J64+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E64,PL_DtMa,PL_DtF,PL_DtSh)-F64*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E64,PL_DtMa,PL_C)-F64*PL_PhiRsh)   |
| 65  | 5046                                                                                                                                                                                                        | 62.8                                                                           | 2.329                                                                                                                                                                                                                                                                                                                                       | 0.294    | 99.4       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B65,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C65,PL_RhoF)  | =MAX(0,G65-F65*PL_PhiDsh)   | =MAX(0,D65-F65*PL_NphiSh)   | =IF(H65-I65>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I65,H65,J65+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E65,PL_DtMa,PL_DtF,PL_DtSh)-F65*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E65,PL_DtMa,PL_C)-F65*PL_PhiRsh)   |
| 66  | 5048                                                                                                                                                                                                        | 60.8                                                                           | 2.333                                                                                                                                                                                                                                                                                                                                       | 0.287    | 98         | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B66,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C66,PL_RhoF)  | =MAX(0,G66-F66*PL_PhiDsh)   | =MAX(0,D66-F66*PL_NphiSh)   | =IF(H66-I66>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I66,H66,J66+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E66,PL_DtMa,PL_DtF,PL_DtSh)-F66*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E66,PL_DtMa,PL_C)-F66*PL_PhiRsh)   |
| 67  | 5050                                                                                                                                                                                                        | 65.4                                                                           | 2.335                                                                                                                                                                                                                                                                                                                                       | 0.293    | 99.9       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B67,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C67,PL_RhoF)  | =MAX(0,G67-F67*PL_PhiDsh)   | =MAX(0,D67-F67*PL_NphiSh)   | =IF(H67-I67>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I67,H67,J67+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E67,PL_DtMa,PL_DtF,PL_DtSh)-F67*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E67,PL_DtMa,PL_C)-F67*PL_PhiRsh)   |
| 68  | 5052                                                                                                                                                                                                        | 61.1                                                                           | 2.336                                                                                                                                                                                                                                                                                                                                       | 0.289    | 98.5       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B68,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C68,PL_RhoF)  | =MAX(0,G68-F68*PL_PhiDsh)   | =MAX(0,D68-F68*PL_NphiSh)   | =IF(H68-I68>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I68,H68,J68+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E68,PL_DtMa,PL_DtF,PL_DtSh)-F68*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E68,PL_DtMa,PL_C)-F68*PL_PhiRsh)   |
| 69  | 5054                                                                                                                                                                                                        | 64.1                                                                           | 2.345                                                                                                                                                                                                                                                                                                                                       | 0.294    | 99.3       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B69,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C69,PL_RhoF)  | =MAX(0,G69-F69*PL_PhiDsh)   | =MAX(0,D69-F69*PL_NphiSh)   | =IF(H69-I69>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I69,H69,J69+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E69,PL_DtMa,PL_DtF,PL_DtSh)-F69*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E69,PL_DtMa,PL_C)-F69*PL_PhiRsh)   |
| 70  | 5056                                                                                                                                                                                                        | 68.7                                                                           | 2.345                                                                                                                                                                                                                                                                                                                                       | 0.291    | 99.8       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B70,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C70,PL_RhoF)  | =MAX(0,G70-F70*PL_PhiDsh)   | =MAX(0,D70-F70*PL_NphiSh)   | =IF(H70-I70>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I70,H70,J70+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E70,PL_DtMa,PL_DtF,PL_DtSh)-F70*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E70,PL_DtMa,PL_C)-F70*PL_PhiRsh)   |
| 71  | 5058                                                                                                                                                                                                        | 87.1                                                                           | 2.412                                                                                                                                                                                                                                                                                                                                       | 0.329    | 105        | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B71,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C71,PL_RhoF)  | =MAX(0,G71-F71*PL_PhiDsh)   | =MAX(0,D71-F71*PL_NphiSh)   | =IF(H71-I71>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I71,H71,J71+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E71,PL_DtMa,PL_DtF,PL_DtSh)-F71*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E71,PL_DtMa,PL_C)-F71*PL_PhiRsh)   |
| 72  | 5060                                                                                                                                                                                                        | 111.4                                                                          | 2.467                                                                                                                                                                                                                                                                                                                                       | 0.352    | 108.9      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B72,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C72,PL_RhoF)  | =MAX(0,G72-F72*PL_PhiDsh)   | =MAX(0,D72-F72*PL_NphiSh)   | =IF(H72-I72>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I72,H72,J72+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E72,PL_DtMa,PL_DtF,PL_DtSh)-F72*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E72,PL_DtMa,PL_C)-F72*PL_PhiRsh)   |
| 73  | 5062                                                                                                                                                                                                        | 113.6                                                                          | 2.483                                                                                                                                                                                                                                                                                                                                       | 0.359    | 110        | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B73,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C73,PL_RhoF)  | =MAX(0,G73-F73*PL_PhiDsh)   | =MAX(0,D73-F73*PL_NphiSh)   | =IF(H73-I73>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I73,H73,J73+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E73,PL_DtMa,PL_DtF,PL_DtSh)-F73*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E73,PL_DtMa,PL_C)-F73*PL_PhiRsh)   |
| 74  | 5064                                                                                                                                                                                                        | 116.6                                                                          | 2.474                                                                                                                                                                                                                                                                                                                                       | 0.359    | 110.8      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B74,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C74,PL_RhoF)  | =MAX(0,G74-F74*PL_PhiDsh)   | =MAX(0,D74-F74*PL_NphiSh)   | =IF(H74-I74>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I74,H74,J74+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E74,PL_DtMa,PL_DtF,PL_DtSh)-F74*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E74,PL_DtMa,PL_C)-F74*PL_PhiRsh)   |
| 75  | 5066                                                                                                                                                                                                        | 111.2                                                                          | 2.485                                                                                                                                                                                                                                                                                                                                       | 0.361    | 109.5      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B75,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C75,PL_RhoF)  | =MAX(0,G75-F75*PL_PhiDsh)   | =MAX(0,D75-F75*PL_NphiSh)   | =IF(H75-I75>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I75,H75,J75+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E75,PL_DtMa,PL_DtF,PL_DtSh)-F75*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E75,PL_DtMa,PL_C)-F75*PL_PhiRsh)   |
| 76  | 5068                                                                                                                                                                                                        | 117.9                                                                          | 2.48                                                                                                                                                                                                                                                                                                                                        | 0.356    | 110.2      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B76,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C76,PL_RhoF)  | =MAX(0,G76-F76*PL_PhiDsh)   | =MAX(0,D76-F76*PL_NphiSh)   | =IF(H76-I76>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I76,H76,J76+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E76,PL_DtMa,PL_DtF,PL_DtSh)-F76*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E76,PL_DtMa,PL_C)-F76*PL_PhiRsh)   |
| 77  | 5070                                                                                                                                                                                                        | 106.2                                                                          | 2.488                                                                                                                                                                                                                                                                                                                                       | 0.334    | 106.2      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B77,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C77,PL_RhoF)  | =MAX(0,G77-F77*PL_PhiDsh)   | =MAX(0,D77-F77*PL_NphiSh)   | =IF(H77-I77>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I77,H77,J77+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E77,PL_DtMa,PL_DtF,PL_DtSh)-F77*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E77,PL_DtMa,PL_C)-F77*PL_PhiRsh)   |
| 78  | 5072                                                                                                                                                                                                        | 69.6                                                                           | 2.53                                                                                                                                                                                                                                                                                                                                        | 0.208    | 86.7       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B78,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C78,PL_RhoF)  | =MAX(0,G78-F78*PL_PhiDsh)   | =MAX(0,D78-F78*PL_NphiSh)   | =IF(H78-I78>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I78,H78,J78+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E78,PL_DtMa,PL_DtF,PL_DtSh)-F78*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E78,PL_DtMa,PL_C)-F78*PL_PhiRsh)   |
| 79  | 5074                                                                                                                                                                                                        | 28.7                                                                           | 2.567                                                                                                                                                                                                                                                                                                                                       | 0.074    | 65.5       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B79,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C79,PL_RhoF)  | =MAX(0,G79-F79*PL_PhiDsh)   | =MAX(0,D79-F79*PL_NphiSh)   | =IF(H79-I79>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I79,H79,J79+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E79,PL_DtMa,PL_DtF,PL_DtSh)-F79*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E79,PL_DtMa,PL_C)-F79*PL_PhiRsh)   |
| 80  | 5076                                                                                                                                                                                                        | 28.4                                                                           | 2.502                                                                                                                                                                                                                                                                                                                                       | 0.102    | 70.8       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B80,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C80,PL_RhoF)  | =MAX(0,G80-F80*PL_PhiDsh)   | =MAX(0,D80-F80*PL_NphiSh)   | =IF(H80-I80>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I80,H80,J80+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E80,PL_DtMa,PL_DtF,PL_DtSh)-F80*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E80,PL_DtMa,PL_C)-F80*PL_PhiRsh)   |
| 81  | 5078                                                                                                                                                                                                        | 31.9                                                                           | 2.306                                                                                                                                                                                                                                                                                                                                       | 0.219    | 88         | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B81,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C81,PL_RhoF)  | =MAX(0,G81-F81*PL_PhiDsh)   | =MAX(0,D81-F81*PL_NphiSh)   | =IF(H81-I81>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I81,H81,J81+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E81,PL_DtMa,PL_DtF,PL_DtSh)-F81*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E81,PL_DtMa,PL_C)-F81*PL_PhiRsh)   |
| 82  | 5080                                                                                                                                                                                                        | 36                                                                             | 2.245                                                                                                                                                                                                                                                                                                                                       | 0.268    | 95.2       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B82,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C82,PL_RhoF)  | =MAX(0,G82-F82*PL_PhiDsh)   | =MAX(0,D82-F82*PL_NphiSh)   | =IF(H82-I82>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I82,H82,J82+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E82,PL_DtMa,PL_DtF,PL_DtSh)-F82*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E82,PL_DtMa,PL_C)-F82*PL_PhiRsh)   |
| 83  | 5082                                                                                                                                                                                                        | 38.7                                                                           | 2.227                                                                                                                                                                                                                                                                                                                                       | 0.265    | 95.7       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B83,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C83,PL_RhoF)  | =MAX(0,G83-F83*PL_PhiDsh)   | =MAX(0,D83-F83*PL_NphiSh)   | =IF(H83-I83>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I83,H83,J83+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E83,PL_DtMa,PL_DtF,PL_DtSh)-F83*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E83,PL_DtMa,PL_C)-F83*PL_PhiRsh)   |
| 84  | 5084                                                                                                                                                                                                        | 34.6                                                                           | 2.233                                                                                                                                                                                                                                                                                                                                       | 0.274    | 96.2       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B84,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C84,PL_RhoF)  | =MAX(0,G84-F84*PL_PhiDsh)   | =MAX(0,D84-F84*PL_NphiSh)   | =IF(H84-I84>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I84,H84,J84+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E84,PL_DtMa,PL_DtF,PL_DtSh)-F84*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E84,PL_DtMa,PL_C)-F84*PL_PhiRsh)   |
| 85  | 5086                                                                                                                                                                                                        | 37.5                                                                           | 2.228                                                                                                                                                                                                                                                                                                                                       | 0.269    | 95.6       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B85,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C85,PL_RhoF)  | =MAX(0,G85-F85*PL_PhiDsh)   | =MAX(0,D85-F85*PL_NphiSh)   | =IF(H85-I85>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I85,H85,J85+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E85,PL_DtMa,PL_DtF,PL_DtSh)-F85*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E85,PL_DtMa,PL_C)-F85*PL_PhiRsh)   |
| 86  | 5088                                                                                                                                                                                                        | 35.5                                                                           | 2.235                                                                                                                                                                                                                                                                                                                                       | 0.27     | 95.5       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B86,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C86,PL_RhoF)  | =MAX(0,G86-F86*PL_PhiDsh)   | =MAX(0,D86-F86*PL_NphiSh)   | =IF(H86-I86>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I86,H86,J86+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E86,PL_DtMa,PL_DtF,PL_DtSh)-F86*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E86,PL_DtMa,PL_C)-F86*PL_PhiRsh)   |
| 87  | 5090                                                                                                                                                                                                        | 38.7                                                                           | 2.224                                                                                                                                                                                                                                                                                                                                       | 0.271    | 96.6       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B87,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C87,PL_RhoF)  | =MAX(0,G87-F87*PL_PhiDsh)   | =MAX(0,D87-F87*PL_NphiSh)   | =IF(H87-I87>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I87,H87,J87+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E87,PL_DtMa,PL_DtF,PL_DtSh)-F87*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E87,PL_DtMa,PL_C)-F87*PL_PhiRsh)   |
| 88  | 5092                                                                                                                                                                                                        | 32.3                                                                           | 2.233                                                                                                                                                                                                                                                                                                                                       | 0.272    | 95.1       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B88,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C88,PL_RhoF)  | =MAX(0,G88-F88*PL_PhiDsh)   | =MAX(0,D88-F88*PL_NphiSh)   | =IF(H88-I88>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I88,H88,J88+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E88,PL_DtMa,PL_DtF,PL_DtSh)-F88*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E88,PL_DtMa,PL_C)-F88*PL_PhiRsh)   |
| 89  | 5094                                                                                                                                                                                                        | 39.2                                                                           | 2.229                                                                                                                                                                                                                                                                                                                                       | 0.271    | 96.2       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B89,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C89,PL_RhoF)  | =MAX(0,G89-F89*PL_PhiDsh)   | =MAX(0,D89-F89*PL_NphiSh)   | =IF(H89-I89>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I89,H89,J89+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E89,PL_DtMa,PL_DtF,PL_DtSh)-F89*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E89,PL_DtMa,PL_C)-F89*PL_PhiRsh)   |
| 90  | 5096                                                                                                                                                                                                        | 34.9                                                                           | 2.229                                                                                                                                                                                                                                                                                                                                       | 0.269    | 95.7       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B90,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C90,PL_RhoF)  | =MAX(0,G90-F90*PL_PhiDsh)   | =MAX(0,D90-F90*PL_NphiSh)   | =IF(H90-I90>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I90,H90,J90+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E90,PL_DtMa,PL_DtF,PL_DtSh)-F90*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E90,PL_DtMa,PL_C)-F90*PL_PhiRsh)   |
| 91  | 5098                                                                                                                                                                                                        | 42                                                                             | 2.248                                                                                                                                                                                                                                                                                                                                       | 0.282    | 97.6       | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B91,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C91,PL_RhoF)  | =MAX(0,G91-F91*PL_PhiDsh)   | =MAX(0,D91-F91*PL_NphiSh)   | =IF(H91-I91>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I91,H91,J91+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E91,PL_DtMa,PL_DtF,PL_DtSh)-F91*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E91,PL_DtMa,PL_C)-F91*PL_PhiRsh)   |
| 92  | 5100                                                                                                                                                                                                        | 74                                                                             | 2.355                                                                                                                                                                                                                                                                                                                                       | 0.312    | 102        | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B92,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C92,PL_RhoF)  | =MAX(0,G92-F92*PL_PhiDsh)   | =MAX(0,D92-F92*PL_NphiSh)   | =IF(H92-I92>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I92,H92,J92+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E92,PL_DtMa,PL_DtF,PL_DtSh)-F92*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E92,PL_DtMa,PL_C)-F92*PL_PhiRsh)   |
| 93  | 5102                                                                                                                                                                                                        | 110.2                                                                          | 2.461                                                                                                                                                                                                                                                                                                                                       | 0.356    | 109.7      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B93,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C93,PL_RhoF)  | =MAX(0,G93-F93*PL_PhiDsh)   | =MAX(0,D93-F93*PL_NphiSh)   | =IF(H93-I93>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I93,H93,J93+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E93,PL_DtMa,PL_DtF,PL_DtSh)-F93*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E93,PL_DtMa,PL_C)-F93*PL_PhiRsh)   |
| 94  | 5104                                                                                                                                                                                                        | 112.8                                                                          | 2.473                                                                                                                                                                                                                                                                                                                                       | 0.358    | 109.7      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B94,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C94,PL_RhoF)  | =MAX(0,G94-F94*PL_PhiDsh)   | =MAX(0,D94-F94*PL_NphiSh)   | =IF(H94-I94>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I94,H94,J94+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E94,PL_DtMa,PL_DtF,PL_DtSh)-F94*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E94,PL_DtMa,PL_C)-F94*PL_PhiRsh)   |
| 95  | 5106                                                                                                                                                                                                        | 113.1                                                                          | 2.485                                                                                                                                                                                                                                                                                                                                       | 0.364    | 110        | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B95,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C95,PL_RhoF)  | =MAX(0,G95-F95*PL_PhiDsh)   | =MAX(0,D95-F95*PL_NphiSh)   | =IF(H95-I95>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I95,H95,J95+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E95,PL_DtMa,PL_DtF,PL_DtSh)-F95*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E95,PL_DtMa,PL_C)-F95*PL_PhiRsh)   |
| 96  | 5108                                                                                                                                                                                                        | 117                                                                            | 2.475                                                                                                                                                                                                                                                                                                                                       | 0.356    | 110.1      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B96,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C96,PL_RhoF)  | =MAX(0,G96-F96*PL_PhiDsh)   | =MAX(0,D96-F96*PL_NphiSh)   | =IF(H96-I96>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I96,H96,J96+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E96,PL_DtMa,PL_DtF,PL_DtSh)-F96*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E96,PL_DtMa,PL_C)-F96*PL_PhiRsh)   |
| 97  | 5110                                                                                                                                                                                                        | 112.2                                                                          | 2.482                                                                                                                                                                                                                                                                                                                                       | 0.363    | 110.4      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B97,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C97,PL_RhoF)  | =MAX(0,G97-F97*PL_PhiDsh)   | =MAX(0,D97-F97*PL_NphiSh)   | =IF(H97-I97>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I97,H97,J97+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E97,PL_DtMa,PL_DtF,PL_DtSh)-F97*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E97,PL_DtMa,PL_C)-F97*PL_PhiRsh)   |
| 98  | 5112                                                                                                                                                                                                        | 115.6                                                                          | 2.477                                                                                                                                                                                                                                                                                                                                       | 0.359    | 110.1      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B98,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C98,PL_RhoF)  | =MAX(0,G98-F98*PL_PhiDsh)   | =MAX(0,D98-F98*PL_NphiSh)   | =IF(H98-I98>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I98,H98,J98+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E98,PL_DtMa,PL_DtF,PL_DtSh)-F98*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E98,PL_DtMa,PL_C)-F98*PL_PhiRsh)   |
| 99  | 5114                                                                                                                                                                                                        | 113.4                                                                          | 2.485                                                                                                                                                                                                                                                                                                                                       | 0.358    | 109.7      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B99,PL_GRcl,PL_GRsh)))  | =PO.PP.Porosity.FromDensity(PL_RhoMa,C99,PL_RhoF)  | =MAX(0,G99-F99*PL_PhiDsh)   | =MAX(0,D99-F99*PL_NphiSh)   | =IF(H99-I99>PL_GasX,1,0)   | =PO.PP.Porosity.FromNeutronDensity(I99,H99,J99+1)    | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E99,PL_DtMa,PL_DtF,PL_DtSh)-F99*PL_PhiWsh)   | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E99,PL_DtMa,PL_C)-F99*PL_PhiRsh)   |
| 100 | 5116                                                                                                                                                                                                        | 117.6                                                                          | 2.475                                                                                                                                                                                                                                                                                                                                       | 0.359    | 111        | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B100,PL_GRcl,PL_GRsh))) | =PO.PP.Porosity.FromDensity(PL_RhoMa,C100,PL_RhoF) | =MAX(0,G100-F100*PL_PhiDsh) | =MAX(0,D100-F100*PL_NphiSh) | =IF(H100-I100>PL_GasX,1,0) | =PO.PP.Porosity.FromNeutronDensity(I100,H100,J100+1) | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E100,PL_DtMa,PL_DtF,PL_DtSh)-F100*PL_PhiWsh) | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E100,PL_DtMa,PL_C)-F100*PL_PhiRsh) |
| 101 | 5118                                                                                                                                                                                                        | 111.2                                                                          | 2.483                                                                                                                                                                                                                                                                                                                                       | 0.36     | 109.4      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B101,PL_GRcl,PL_GRsh))) | =PO.PP.Porosity.FromDensity(PL_RhoMa,C101,PL_RhoF) | =MAX(0,G101-F101*PL_PhiDsh) | =MAX(0,D101-F101*PL_NphiSh) | =IF(H101-I101>PL_GasX,1,0) | =PO.PP.Porosity.FromNeutronDensity(I101,H101,J101+1) | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E101,PL_DtMa,PL_DtF,PL_DtSh)-F101*PL_PhiWsh) | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E101,PL_DtMa,PL_C)-F101*PL_PhiRsh) |
| 102 | 5120                                                                                                                                                                                                        | 117.9                                                                          | 2.482                                                                                                                                                                                                                                                                                                                                       | 0.36     | 110.5      | =MAX(0,MIN(1,PO.PP.Vsh.GammaRayIndex(B102,PL_GRcl,PL_GRsh))) | =PO.PP.Porosity.FromDensity(PL_RhoMa,C102,PL_RhoF) | =MAX(0,G102-F102*PL_PhiDsh) | =MAX(0,D102-F102*PL_NphiSh) | =IF(H102-I102>PL_GasX,1,0) | =PO.PP.Porosity.FromNeutronDensity(I102,H102,J102+1) | =MAX(0,PO.PP.Porosity.FromSonic.Wyllie(E102,PL_DtMa,PL_DtF,PL_DtSh)-F102*PL_PhiWsh) | =MAX(0,PO.PP.Porosity.FromSonic.RHG(E102,PL_DtMa,PL_C)-F102*PL_PhiRsh) |

## Lambdas

| Name | RefersTo | Comment |
|------|----------|---------|
| PO.PP.Vsh.GammaRayIndex | =LAMBDA(GR, GR_cl, GR_sh, (GR-GR_cl)/(GR_sh-GR_cl)) | Linear gamma-ray shale index, IGR = (GR - GRclean) / (GRshale - GRclean). |
| PO.PP.Porosity.FromDensity | =LAMBDA(Rho_ma, Rho_b, Rho_f, (Rho_ma-Rho_b)/(Rho_ma-Rho_f)) | Porosity from a density log, (matrix density - bulk density) / (matrix density - fluid density). |
| PO.PP.Porosity.FromNeutronDensity | =LAMBDA(Phi_N, Phi_D, Mode, IF(Mode=1, (Phi_N+Phi_D)/2, IF(Mode=2, SQRT((Phi_N^2+Phi_D^2)/2), NA()))) | Density-neutron crossplot porosity: Mode 1 the arithmetic mean (liquid-filled), Mode 2 the root-mean-square gas form sqrt((phiN^2 + phiD^2)/2). |
| PO.PP.Porosity.FromSonic.Wyllie | =LAMBDA(Dt, Dt_ma, Dt_f, Dt_sh, ((Dt-Dt_ma)/(Dt_f-Dt_ma))/(Dt_sh/100)) | Wyllie time-average sonic porosity divided by the shale compaction factor Dt_sh/100. |
| PO.PP.Porosity.FromSonic.RHG | =LAMBDA(Dt, Dt_ma, C, C*(Dt-Dt_ma)/Dt) | Raymer-Hunt-Gardner sonic porosity, C times (transit time minus matrix) over transit time. |

## Names

| Name | RefersTo | Comment |
|------|----------|---------|
| PL_RhoMa | $B$4 | Matrix density (sandstone), g/cm³ |
| PL_RhoF | $B$5 | Fluid density (fresh mud filtrate), g/cm³ |
| PL_DtMa | $B$6 | Matrix transit time (sandstone), µs/ft |
| PL_DtF | $B$7 | Fluid transit time, µs/ft |
| PL_C | $B$8 | Raymer-Hunt-Gardner constant (0.67 for liquid, 0.6 for gas) |
| PL_GRcl | $B$9 | Clean-sand gamma ray (Vsh = 0), API |
| PL_GRsh | $B$10 | Shale gamma ray (Vsh = 1), API |
| PL_RhoSh | $B$11 | Shale bulk density, read in a thick shale, g/cm³ |
| PL_NphiSh | $B$12 | Shale neutron porosity, % |
| PL_DtSh | $B$13 | Shale transit time (also Wyllie's Δtsh/100), µs/ft |
| PL_GasX | $B$14 | Crossover that flags gas: density less neutron porosity above, % |
| PL_ZTop | $B$15 | Zone top (the clean oil sand, a foot inside its top), ft |
| PL_ZBase | $B$16 | Zone base (a foot inside the bed's base), ft |
| PL_Agree | $B$17 | Agreement limit, sonic against density-neutron porosity, % |
| PL_VshCut | $B$18 | Shale-volume limit for small shale corrections, v/v |
| PL_Inputs | $B$4:$B$18 | The matrix and fluid density and transit time, the RHG constant, the gamma-ray picks, the shale's density, neutron and transit time, the gas crossover, the zone and the two limits |
| PL_PhiDsh | $B$21 | Shale density porosity, % |
| PL_PhiWsh | $B$22 | Shale sonic porosity, Wyllie, % |
| PL_PhiRsh | $B$23 | Shale sonic porosity, Raymer-Hunt-Gardner, % |
| PL_Vsh | $B$24 | Zone mean shale volume (linear gamma-ray index), v/v |
| PL_PhiD | $B$25 | Zone density porosity, shale-corrected, % |
| PL_PhiN | $B$26 | Zone neutron porosity, shale-corrected, % |
| PL_PhiND | $B$27 | Zone density-neutron porosity, % |
| PL_PhiW | $B$28 | Zone sonic porosity, Wyllie, shale-corrected, % |
| PL_PhiR | $B$29 | Zone sonic porosity, Raymer-Hunt-Gardner, shale-corrected, % |
| PL_Gas | $B$30 | Zone samples that cross over (gas form used) |
| PL_DiffW | $B$31 | Wyllie less density-neutron porosity, % |
| PL_DiffR | $B$32 | Raymer-Hunt-Gardner less density-neutron porosity, % |
| PL_AgreeCheck | $B$33 | Sonic agreement check verdict |
| PL_AgreeCheckNote | $C$33 | Sonic agreement check comment |
| PL_GasCheck | $B$34 | Gas check verdict |
| PL_GasCheckNote | $C$34 | Gas check comment |
| PL_ShaleCheck | $B$35 | Shale correction check verdict |
| PL_ShaleCheckNote | $C$35 | Shale correction check comment |
| PL_Results | $B$21:$B$35 | The shale's density and sonic porosities, the zone's shale volume and its shale-corrected density, neutron, density-neutron and sonic porosities, the gas count, the sonic differences and three checks |
| PL_Curve | $A$42:$M$102 | Each depth's GR, density, neutron and sonic, its shale volume, its density, shale-corrected density and neutron porosities, the gas flag, the density-neutron porosity and the shale-corrected sonic porosities |

---

## Related Blueprints
- [Net Pay and Cutoffs over an Interval](/blueprint/po.pp.netpay.cutoffs.md)
- [Saturation-Height Function by Leverett J](/blueprint/po.pp.shf.fit.md)
- [Permeability from Logs](/blueprint/po.pp.permeability.estimate.md)
- [Shaly-Sand Water Saturation](/blueprint/po.pp.sw.shaly.md)
- [Archie Water Saturation and Bulk Volume Water](/blueprint/po.pp.sw.archie.md)
- [Shale Volume from Gamma Ray](/blueprint/po.pp.vshale.gr.md)

